How to install frameless glass doors Installation points of frameless glass doors

Glass doors give a romantic feeling, so many people are willing to choose glass doors when decorating their homes. Compared with the glass door, the frameless glass door looks more agile and dreamy without the restraint of the frame. Next, I will introduce the installation method and key points of frameless glass doors.

As the name implies, a frameless glass door is a glass door without a frame, and there is no reinforced frame around the door leaf glass. Almost completely transparent, because of this, good lighting, can be used in any combination. In addition to home decoration, it can also be used in shopping malls, hotels, offices and other places.

The biggest difference between frameless glass doors and ordinary categories, such as aluminum alloy doors, plastic steel doors, security doors, solid wood doors and so on. , lies in the framework. Frameless glass doors generally use 8 ~ 12 mm tempered glass, which can be fixed up and down with decorative frames or clips, and need buried springs.

Installation method of frameless glass door

1, alignment: At the beginning of frameless glass door installation, fixed glass partition and movable glass door leaf must be aligned uniformly.

In order to determine the position of the door frame, accurately measure the ground elevation and the top elevation of the door frame. 2. Install the limit groove at the top of frameless glass door frame: lead out two metal decorative plate edges from the center line, and then install the limit groove at the top of the door frame according to the edges.

3. Install the wooden base with metal decorative surface of frameless glass door: nail the square wood on the original embedded wooden brick.

Or use expansion bolts to nail the square wood firmly on the ground, and then use all-purpose glue to stick the metal veneer on the square wood. 4. Install the rigid door frame. Nail the square wood of the door frame according to the center line of the bomb, and then use plywood to determine the overall size and position of the door frame column (pay attention to deduct the size of the decorative surface). Finally, wrap the metal decorative surface, and the butt joint of the decorative surface should be placed between the two sides of the mounting glass. The joint position must be accurate and vertical.

5. Glass installation. Use glass sucker (or glass sucker machine) to suck the thick glass tightly, and then 2 ~ 3 people will hold the sucker to lift the thick glass plate and move it to the installation site for preparation. Positioning method: insert the upper part of the glass into the limit groove at the top of the door frame, then put the lower part of the glass on the bottom bracket and align it with the center line. The installation positions of the door frames on both sides should be well aligned, so that the two sides of the thick glass just seal the seams of the metal decorative surface of the door frame.

It is required that you can't see inside and outside the seam. 6. Glass fixing. Nail two square battens inside and outside the base wood, sandwich the thick glass in the middle, but leave a gap of about 4mm with the thick glass plate, then apply all-purpose glue on the square battens, and stick the decorative metal plate on the square timber and the two square battens.

7. Butt joint between frameless glass doors: Because the width of the thick glass plate in the fixed part is too large, it must be assembled by two or more pieces. When two pieces are aligned and spliced, a joint is bound to be formed, and a distance of 2 ~ 3 mm should be left at the joint.

Installation points of frameless glass door

1. Before all installation steps are started, it is necessary to ensure that all other processes of interior decoration are basically completed before proceeding, and the alignment and positioning shall be carried out in strict accordance with the requirements of design drawings.

2. The width of the limit groove at the top of the frameless glass door frame should be greater than the glass thickness by 2 ~ 4 mm, and the groove depth should be between 20 ~ 30 mm, so as to facilitate glue injection.

3, when outsourcing metal decorative surface, facing butt joint should be placed in the middle of the installation glass on both sides. The joint position must be accurate and vertical.

4. When installing the glass door leaf of frameless glass door, the positioning method is as follows: first, insert the upper part of the glass into the limit groove at the top of the door frame, and then put the lower part of the glass on the bottom bracket to align with the center line. The installation positions of the door frames on both sides should be arranged so that the two sides of the thick glass can just seal the metal decorative seam of the door frame, and it is required that the decorative seam cannot be seen inside and outside.

5. When sealing with glass glue, the injection sequence should start from the end of a certain gap to the end, and don't stop halfway.

6. In the process of docking between the glasses of frameless glass doors, the glass incision of the joint must be inverted, and after the glass is fixed, glass glue should be used to enter the gap. After pouring glue, it should also be scraped flat with plastic cloth to make the gap form a clean and uniform straight line, and wipe off the glue mark on the glass surface with a clean cloth.

The above contents are the installation methods and key points of frameless glass doors that I introduced to you. I believe that after reading the article, you have a better understanding of the installation of frameless glass doors. Pay attention to safety when installing frameless glass doors.

6. In the process of docking between the glasses of frameless glass doors, the glass incision of the joint must be inverted, and after the glass is fixed, glass glue should be used to enter the gap. After pouring glue, it should also be scraped flat with plastic cloth to make the gap form a clean and uniform straight line, and wipe off the glue mark on the glass surface with a clean cloth.

The above contents are the installation methods and key points of frameless glass doors that I introduced to you. I believe that after reading the article, you have a better understanding of the installation of frameless glass doors. Pay attention to safety when installing frameless glass doors.