There are several ways to monitor wiring

Abstract: Monitoring equipment is a very common security equipment. It needs to be wired during installation. Monitoring generally has video cables and power cables. When wiring, different wiring methods can be used according to different installation areas. There are five common types: bridges, underground wells, underground, pipes on the wall or wire troughs, and flying wires. Monitoring wiring also belongs to the category of comprehensive wiring. When wiring, pay attention to selecting suitable wires, try to avoid interference from strong magnetic fields, separate strong and weak current wiring, and mark the wiring well. Let’s learn about the knowledge of monitoring integrated wiring. 1. There are several methods of surveillance wiring

Nowadays, there are surveillance cameras everywhere. Video cables and power cords are required for surveillance. In order to facilitate use, a surveillance wiring plan needs to be prepared. The main surveillance wiring methods are There are the following types:

1. Bridge: Many units have weak current and strong current bridges, and wiring can be done along the weak current bridge.

2. Underground well: Monitoring for outdoor use usually requires wiring through an underground well. Find the well and use a threader to bring the wires there.

3. Underground: Some outdoor wells do not have wells. If you want to install monitoring, you can only lay the wiring underground. Be careful to wear pipes to protect the lines.

4. Make pipes or wire troughs on the wall: When monitoring wiring, you can also wire through pipes and fix them on the wall.

5. Flying wires: If conditions do not allow, then flying wires can only be used for wiring. Steel wires need to be tied and fixed on the wires.

2. Is monitoring wiring considered integrated wiring?

Integrated wiring is a building wiring method through which various control devices are connected to the information management system. Then monitoring wiring is integrated wiring. ?

Generally speaking, monitoring wiring is weak current integrated system wiring, and it is also a part of integrated wiring. In addition to monitoring wiring, building automation, intercom, card system, smart home, network, etc. also belong to The scope of integrated wiring.

3. What should be paid attention to in monitoring integrated wiring?

1. For monitoring integrated wiring, suitable wires must be selected in advance to ensure voltage stability without affecting the normal operation of the camera.

2. Pay attention to the surrounding environment when monitoring wiring lines, try to avoid interference from strong magnetic fields, and arrange shielded wires when avoidance is unavoidable.

3. In monitoring wiring, strong current and weak current must be routed separately, and their respective pipelines must be routed to prevent strong current interference.

4. There should be no end nodes in the middle of the video cables of the surveillance wiring, and there should be no connection points in the middle of the power cables. In case of any, a junction box must be installed.

5. Both ends of the monitoring wiring must be marked to facilitate debugging and maintenance.