What is the reason why the washing machine can wash clothes but not dehydrate? Shenyang washing machine maintenance

1. The washing machine panel door is not closed properly or the top cover switch is damaged, or the switch has poor contact.

2. The drainage system of the washing machine is blocked or the drainage valve is damaged, which makes it difficult to discharge the washing liquid in the drum for a while, and the water level switch cannot be reset, so that the washing machine cannot enter the dehydration program.

3. The drain valve does not open the clutch, and the electromagnetic valve of the automatic washing machine is damaged, which will also cause dehydration to fail to operate normally.

4. Poor motor performance and capacitance problems lead to insufficient output power.

Suggested treatment:

1, you can put a proper amount of clothes before washing clothes, not too much at a time, so as not to cause imbalance when washing clothes. The dehydration effect is not good.

2. If the safety switch on the top cover of the washing machine is damaged, it should be repaired by professional maintenance personnel.

3. Check whether the adjusting rod nut on the drain valve is loose. If it is loose, fix the nut at this time and open the drain valve spool. Observe whether the drain valve can be pulled open by tractor. If not, it may be a computer motherboard failure. If it is observed that the valve core of the drain valve is pulled open, but it does not drain water, it is that the drain pipe is blocked. In most cases, the inlet of the drain valve is blocked, and the fault can be eliminated by taking out the sundries.

4, computer board problems lead to drainage, usually need to repair or replace the computer board.