How is the plant decorative wall planted?

(1) Measure the specific dimensions of the decoration site, and make the construction plan.

(2) The steel frame keel is used for modeling. Steel frame keel has the characteristics of heavy load, light weight, earthquake resistance and wind resistance, and is suitable for making indoor plant walls.

(3) Three-dimensional nail sealing is carried out on the constructed steel frame keel.

(4) Brush coating, that is, brush a layer of paint on the surface to fix the plant bag.

(5) stick a plant bag. After the latex is dry, reinforce the plant bag with edge banding or angle iron, which is worthy of being firmly fixed on the wall. Finally, planting plants in various soil bags can make a three-dimensional indoor plant wall.

(6) Irrigation system: After production, an irrigation system should be installed, and a controller can be installed indoors. The whole irrigation system is completely controlled. In this way, the water and nutrients needed for plant growth can be automatically recycled according to the environment and climate.

(7) Plant spreading, that is, the water-absorbing resin absorbs enough water to make the upper layer of storage water full of water, the root of the plant is placed at the bag-tying opening, and then the spread plant bag is hung on the prepared plant wall.

(8) Automatic control device, adding nutrient solution and non-toxic bactericidal pesticide to irrigation water for automatic irrigation, which can optimize water use.