How to wire the switch panel of electric curtain?

1. If you only need remote control, then you only need to ask the electrician to leave a potential in your curtain box or near your curtain installation surface and install a socket (just like reserving an air-conditioning socket)-but it should be noted that this potential requires the bottom box to be "type 86" (non-national external plastic bottom box, which is relatively larger than the iron bottom box of ordinary families).

2. Then ask the electrician to give you a potential on the wall that you think is suitable and beautiful-pay attention to the requirements of the bottom box used above. In addition, lead out a three-core wire (one single wire and two double wires) from the position where you put the bottom box. Note: the motor of each electric curtain track must be connected with three-core wire, and the zero wire of the motor of the two tracks cannot be used!

The position of electric curtain socket should be arranged according to the actual placement of your room. Family decoration is practical and safe first, and beautiful second. When designing, there are several places that need your attention.

First of all, the choice of socket location: it is best to hang curtains on the corner adjacent to that wall. The purpose of doing this is for safety. If the curtain blocks the tea room, the circuit will be out of order, which will easily lead to potential safety hazards.

Secondly, it is best to install electric curtain sockets in inconspicuous places to provide power for electric curtains. There are at least 5 holes in the socket to see if there are other appliances nearby. In this way, if you don't like electric curtains in a few years and need to replace them, this circuit can be used for other purposes. Sometimes it can also be used as a power supply for air conditioners. Of course, in this case, a larger diameter wire should be laid.

Thirdly, from the point of view of home use, the electric curtain socket is not recommended to be installed above, on the contrary, I prefer to be installed below. If necessary, you can connect other electrical appliances or plug boards, which will not be unsightly and save the budget for hydropower transformation. Objectively speaking, electric curtains are only a small part of the decoration value of your whole room. This value does not need to erect a plug-in board at a high place. In the future, if your room cover is arranged, the possibility of using higher boards is too small.

The above method is the preliminary work for installing electric curtains, but it should be reminded that the reserved potential position mentioned above needs to be electrified at any time. As for how the controller is wired and energized? The products are all marked on it. Just remove the socket or switch reserved for the original wiring, put the controller in and install it firmly.