How to install the hotel induction lock?

1, make sure that the mechanical key can open the door, or take out the lock body for testing;

2, the mechanical key can be opened, so it is the circuit part. If it is removed, check whether the circuit is in good condition, and it is easy for non-professionals to break the circuit when installing it;

3. If the wiring is in good condition, connect the wiring to the outside and swipe the card to see if the motor is moving (the motor is invisible by looking at the linkage of the motor). If the motor moves, the sawdust is blocked when you install it, and the tight hole is bigger;

4, the motor is not moving, it must be that the circuit board or the motor is broken, hehe, let's combine it.

Sadly, it's hard not to like this brand. Unless you are willing to use two kinds of software to set the door opening card, you have to change the lock of this brand. Hehe, I recommend a strong lock for you.