What should I do if there is oil slick on the restaurant floor?

What should I do if there is oil slick on the restaurant floor?

How to deal with the oil stain on the restaurant floor? The restaurant has a large flow of people, and there are a lot of liquid stains such as oil and water on the floor, so it is a place where oil stains gather, especially when there is oil stains on the restaurant floor, it is easy for people to slip. How to deal with the oil pollution on the restaurant floor?

How to deal with the oil slick on the restaurant floor? 1 Step 1: Test the ground conditions.

Facing any construction site, it is necessary to determine a test area. Clean up the ground first, dip it in clean water with a flat mop and apply it directly on the ground to see if there will be water on the ground.

If there is accumulated water, carry out the second step of wax removal;

Step 2, remove wax or clean the floor.

Step three, apply protective agent.

The dosage standard of anti-skid agent is as follows:

(1) The water absorption of the anti-slip coating tool in dry state is 300ml.

(Put the dry special coating tool for protective agent into 1 kg antiskid agent, take it out and squeeze it for three times. )

(2) Anti-skid agent kg, according to the above standards, can be dipped for 7 times, each time according to the conventional amount of 16 tile;

(The size of each tile is 0,6 * 0,6 = 0,36 ㎡)

③ 1 kg anti-slip agent can be applied to 1 12 tiles, with the converted area of 40 and 32㎡, and one barrel 10 kg anti-slip agent can handle 403 and 2 ㎡;

Note: If there is still water after the anti-skid agent is coated in this step, then add a little detergent to the anti-skid agent;

Step 4: Wait for the effect.

After the painted ground is completely painted, let it stand for more than 10 minute;

Step 5, clean the surface and test the effect.

Because the anti-skid agent is semi-oily, it is necessary to thoroughly brush the surface with a flat mop or brush while cleaning with clean water, so that the anti-skid effect will be perfectly presented, otherwise the anti-skid effect cannot be tested without cleaning the surface anti-skid agent.

Precautions:

When applying anti-slip agent, don't spill it on the unfinished tiles (spilling it may leave traces, so be careful during construction).

When there are black ceramic tile lines or black marble slabs in the corner, you can apply them directly at one time, paying attention to uniformity.

Ceramic tiles of different materials in the same construction site must be dedicated.

If customers want to do anti-skid only in local areas of the site, such as walkways, they need to inform customers in advance before construction, because the fluidity of anti-skid agent can not be controlled, and the edge areas may leave indelible marks.

In the construction site, if you need to move obstacles such as tables and chairs, you must lift them by two people, and you can't drag them, otherwise you will leave scratches on the surface of the tiles.

When applying anti-slip agent, if the water drops on the surface of ceramic tile condense and shrink, please add more cleaning agents and supporting fluids in time before construction. If the fourth generation anti-skid agent is used, please remove the wax before anti-skid.

How to deal with the oily floor of the restaurant? 2. How to remedy the slippery floor of the restaurant?

1, clean.

If the floor of the dining area is slippery, it is probably because there is oil on the floor. You can soak the mop in hot water, and then add a proper amount of detergent and alcohol, so that stains can be easily removed. After cleaning, the ground can be dry, and the dry ground is not easy to slip. Without oil pollution, the ground will not be very slippery.

2. Carpet laying.

You can spread a carpet on the dining room floor to increase friction. This way, guests will not slip easily.

3. Anti-skid agent

Tile antiskid agent can effectively penetrate into the pores of floor tiles and stones, dissolve a small amount of silicon, thicken the original pores, and form many tiny invisible nano-scale dents on the surface. When the ground meets water, the pores will be filled with water. When the sole of the foot or the sole of the foot passes through the veil, water will be squeezed out of the pores under pressure, so that the pores are in a vacuum state, thus contacting the sole of the foot to form a physical sucker. The ground friction coefficient is greatly improved. It is necessary to use anti-skid agent in restaurants.

Second, how to deal with the wet tile floor.

1 First of all, everyone should pay attention to keep the floor tiles dry and the water on the ground must be cleaned up. After that, you can lay a carpet on the floor tiles, and the carpet should be cleaned regularly. As long as it is kept clean, the ground friction will increase appropriately.

2. In the kitchen, floor tiles are the easiest to slip, which is mainly caused by more oil stains on the ground. You can mop the floor, soak the mop in hot water in advance, or add some detergent to the hot water, mainly to better clean the oil stains on the floor. If you are worried about being too slippery, you can use some desiccant.

3. Many families will use floor tiles as floors after installation. We can wax the floor tiles. If there is residue in the wax, we need professional wax water to remove the wax. It is best to add another layer of anti-slip liquid, pay attention to the anti-slip liquid, keep the humidity at that time, or directly remove the anti-slip liquid in order to save costs. The validity period of this practice is about 10 years.

How to deal with the oil slick on the dining room floor 3 1 carpet mat

Laying anti-skid products such as carpet anti-skid mats is the simplest and most convenient choice for most restaurants and hotels. It seems to save time and effort. Due to the serious pollution of the card, it is very troublesome to clean the carpet pad frequently, which also affects the overall beauty to some extent. If it is not cleaned up in time, it will attract rats, ants, mosquitoes and so on. Especially in hidden corners, and food residues or falling for a long time will give off an odor when eating.

Moreover, it is unrealistic to lay carpets in kitchens with relatively more oil stains. Usually, choose porous hydrophobic anti-skid pad. It is recommended to use anti-skid mats in small areas, such as entrances and exits, bathrooms, kitchens, etc. , can remind and strengthen anti-skid.

2, simple cleaning and anti-slip

Part of the reason why the dining room floor is too slippery is caused by water stains and oil stains on the floor. In order to get rid of the oil stains on the floor, you can add a proper amount of detergent and alcohol to the hot water that mops the floor, and the effect is very good. At the same time, when cleaning the floor, try to mop it clean or suck it clean to avoid slippery when cleaning, especially in rainy days. You need to send more manpower to carry out daily cleaning and strengthen staff cleaning training at ordinary times. This is the most basic and must be done for a long time. Whether there are anti-skid measures or not, it can't be an excuse not to clean.

3, the ground blow-drying device

If there is no manpower dedicated to guarding the ground (refer to crowded shopping malls and public toilets for cleaning), then adding one or two floor dryers or some special equipment can improve work efficiency. It is suggested to pay attention to safety when using the machine to avoid accidents caused by children's playfulness, and at the same time, there should be a special person to follow up to avoid machine aging, long working hours and leakage.

4. Physical treatment of ground anti-skid.

Physical treatment such as mechanical polishing and carving some patterns on the floor can actually solve the anti-skid problem of the floor, but it is not so perfect in appearance. At the same time, because some of the treated floors are uneven, it is difficult to clean them in the future.

5. Use Q8 tile antiskid agent.

Under various circumstances, the accumulated water left on the ground must be handled in time. Anti-skid agent is used for anti-skid treatment of floor. At present, more and more people use them. The floor with anti-skid agent can quickly become safe and anti-skid with large surface resistance. This anti-skid treatment is quick and convenient, and does not affect the normal use of the floor. Some people will say that making a square meter anti-slip is enough for me to buy half a tile!

I think doing this "invisible anti-skid" will increase the cost. For example, using "anti-skid processing outsourcing" service needs to consider labor cost, material cost, after-sales service and so on. You can also buy your own materials. It is also convenient to construct under the guidance of merchant training. A construction, valid for more than 5 years. Compared with unexpected risks, the average daily sharing cost is very low, which is worth it.