How to install sanitary ware

Abstract: Bathroom is a space for residents to take a bath, wash their hands and other daily health activities. Always clean toilets, bathtubs, basins and other sanitary wares to keep them fresh and clean, and provide a healthy washing environment for people. Do you know how to maintain the sanitary ware in the bathroom? How can we prevent sanitary ware from rusting? And how is the sanitary ware installed? Let's take a look with Bian Xiao! Effect of bathroom decoration How to install sanitary ware for daily maintenance after bathroom decoration?

Don't underestimate the bathroom, it is related to the health of you and your family. Residents are at the highest risk of cancer because there are too many chemicals stored here. At the same time, the warm air in the bathroom, coupled with poor ventilation, all kinds of bacteria are often rampant. Therefore, the hygiene of the bathroom can not be ignored.

Part 1: Cleaning and Maintenance of Bathroom Cabinet in Bathroom Washing Area

Bathroom cabinets are indispensable storage furniture in family bathrooms. Bathroom cabinets are composed of base materials and surface materials covered on the base materials, and the materials and structures are slightly complicated, so the correct methods should be used for cleaning and maintenance.

Bathroom cleaning method

1, bathroom cabinets are generally clean.

Dust removal on the surface of bathroom cabinet: If there is a lot of dust on the bathroom cabinet, you can wipe it with a soft cloth. Before wiping, you need to dip some detergent on the soft cloth instead of wiping it directly with a dry soft cloth. Remember to rinse with water to avoid water corrosion and rust.

Cleaning of stains on the surface of bathroom cabinets: If there are stains on the surface, avoid removing them with alcohol, gasoline or other chemical solvents. It's best to choose a neutral cleaner, and don't rub it hard when using a rag. For wooden cabinets, after the water evaporates, apply a little light wax on the original part, and then gently polish it several times to form a protective film.

2. Repair method of bathroom cabinet damage

After the bathroom cabinet has been used for a long time, it is inevitable that various accidental injuries will occur. When cleaning at the end of the year, you can use some tips to repair it. Because most bathroom cabinets are painted with wood, the following mainly introduces the repair methods of the damaged wooden bathroom cabinets.

3. Daily maintenance of bathroom cabinets

If the bathroom cabinet is cleaned and maintained in time every day, by the end of the year, you can easily fix the bathroom cabinet without much thought. Therefore, in order to avoid the coming year, we should make great efforts to clean the bathroom cabinets and know some maintenance matters that should be paid attention to in daily life of the bathroom cabinets.

The second part: the cleaning of the washbasin in the bathroom.

The sink is the central part of the washing area, which is in direct contact with water stains and stains, so it is also the easiest to get dirty. If you are lazy at ordinary times, it is estimated that a lot of dirt has accumulated on the countertop and basin of the sink. For the surprise cleaning at the end of the year, take a look at these tips for cleaning the sink.

1. Cleaning and maintenance methods of washbasin countertops

The above table is the knowledge of cleaning, repair and maintenance of three common countertop materials. You can choose the appropriate cleaning, repair and maintenance methods according to your countertop materials.

2, wash basin cleaning and maintenance methods

The general method of basin cleaning: first prepare cleaning tools such as dishcloth, detergent and small brush. Because the plug ring of the drain on the surface of the washbasin is the easiest place to hide garbage, if there is garbage, clip it up with a clip first; Then clean the surface of the washbasin, wring it out with a rag and detergent and wipe it carefully; The plug ring of the drain pipe cannot be wiped with a rag, but can be brushed with a small brush and detergent. Pay attention to wipe off the water stains on the surface with a dry rag after cleaning.

Precautions for cleaning and maintenance of ceramic washbasin: The cleaning and maintenance of ceramic washbasin is relatively simple. Just wet it with a rag and clean it with detergent. Be careful not to wipe with a rag with high friction. Daily dust, sand, etc. Should be removed in time to prevent surface wear. When scratches appear on the surface of the ceramic basin, you can apply a little toothpaste to the scratches, wipe them repeatedly with a soft cloth, and then wax them.

Precautions for cleaning and maintenance of glass washbasin: If the glass washbasin is often cleaned with soap or facial cleanser, it is easy to form a layer of dirt in the basin, which is difficult to clean. It can be cleaned with vinegar or neutral detergent or toothpaste.

Precautions for winter maintenance of washbasin: the thermal conductivity of ceramics and glass is extremely small, and it is easy to break if it is too hot or too cold. When the temperature is extremely low in winter, we should pay more attention not to wash the washbasin with overheated water.

The third part: mirror cleaning of bathroom cleaning area

The bathroom is often filled with water vapor, and the mirror is often stained with water vapor. After a long time, it will deteriorate into black spots and become foggy. People can't see clearly when looking in the mirror, which affects their mood.

1, general cleaning method of bathroom mirror

The mirror surface should be wiped with soft dry cloth or cotton to prevent the mirror surface from being rubbed; Or wipe with soft cloth or emery cloth dipped in kerosene or wax; You can also use a rag dipped in milk to wipe the mirror and frame, which can make it clear and bright.

2, bathroom mirror descaling method

After taking a bath, the mirror in the bathroom is often blurred by water vapor. Water mist will leave traces of scale after drying, which is difficult to clean. The effective way to remove water mist is to coat a layer of soap on the mirror, then wipe it with a dry towel, and finally scrub it with a wet towel, and the mirror will become clean and shiny.

3, mirror daily maintenance methods

Usually, the mirror should be placed in a dry place, and it should not be hung on the wall casually or near the washbasin. Don't touch the mirror with wet hands, and don't wipe the mirror with wet cloth to avoid increasing the influx of moisture and blackening the optical layer of the mirror; The mirror can't contact with salt, grease and acidic substances, which are easy to corrode the mirror.

Part IV: Hardware cleaning of bathroom washing area.

Under the "hardest hit" of toilet water vapor, hardware is more prone to rust and mildew. So, when cleaning at the end of the year, don't forget to clean up these widgets. The hardware in the washing area is mainly stainless steel faucet, towel rack, bathroom cabinet hardware, photo frame and so on.

1, cleaning method of toilet faucet

Cleaning method of faucet scale: most of the faucets in the bathroom are stainless steel. After a period of use, the gloss of the surface will be obviously reduced, and fog or surface hair will begin to appear, which will seriously affect the appearance. The reason for this is that the scale in the bathroom adheres to the surface of the faucet. When cleaning, you can squeeze a small amount of toothpaste onto the faucet, then brush it gently with a toothbrush, then rinse it with clean water and polish it with a dry cloth.

Precautions for cleaning and maintenance of the faucet: Do not scrub the surface of the stainless steel faucet with steel balls, because the steel balls will leave irreparable scratches on the surface of the stainless steel faucet after scrubbing.

2. Precautions for cleaning and maintenance of other hardware in the cleaning area

The common hardware in the bathroom also includes bathroom cabinets, towel racks, racks, metal chains, hinges and slide rails of photo frames. Matters needing attention in cleaning and maintenance.

Avoid direct sprinkling of strong acid and alkali solution on hardware, and wipe it immediately when it happens carelessly; Avoid using any abrasive cleaning agent, cloth or paper towel, and any cleaning agent and polishing pigment containing strong acid and alkali to wipe the hardware surface; Develop the habit of opening doors and windows, keep the air in the bathroom unobstructed, and adopt the method of bathroom hardware maintenance with dry and wet separation.

How to install sanitary ware

1, sanitary ware installation points-toilet

When installing the toilet, it is best to take the distance between the wall and the pit as the standard. More than 400mm, it will waste space, less than 400mm, the toilet may not fit, we must grasp this degree. Secondly, under normal circumstances, after the button of the toilet tank enters the water, the angle valve is opened, and there is still slow water flowing out. It should be considered that the water level bayonet in the water tank is set too high to make the water in the water tank flow out.

2, sanitary ware installation points-wash basin

If the washbasin is equipped with a marble countertop, we can choose a faucet with a high neck, which will look more elegant. At the same time, you can also buy a wall-mounted faucet, but this maintenance will be relatively troublesome. Washballs are usually divided into hot water pipes and cold water pipes. When installing hot and cold water pipes, the hot water pipe should be on the left side of the faucet and the cold water pipe should be on the right side of the faucet. There is also a small hole on the edge of the washbasin, which is used to facilitate the removal of excess water when the washbasin is full of water. Normal use can't block small holes.

3, sanitary ware installation points-bathtub

There are many kinds of bathtubs, and there are usually pipes at the bottom of the bathtubs for drainage. In order to prevent long-term damage of concealed pipes, the quality must be guaranteed when purchasing concealed pipes, and the slope should be paid attention to during construction. If it is a steam bathtub with massage performance, there are motors, pumps and other equipment at the bottom of the bathtub. When decorating, a manhole should be reserved for later maintenance.

4, sanitary ware installation points-mop pool

Whether the mop is placed on the balcony or other places, the size of the mop pool should be considered when decorating. At the same time, the height of the faucet in the mop pool should be appropriate, and the distance between the hose and the surface of the mop pool is preferably 300mm, so that when we wash the mop, it will not be inconvenient because the hose is too high or too low.