How to design the bathroom sauna?

1, the height of sauna room shall not exceed 210cm;

First of all, we must determine the location of the sauna room, which is usually more suitable and convenient to install in the bathroom. So the size and height of the bathroom have a great influence on the size of the sauna room. Generally speaking, the height of sauna room is less than 2 10CM, and the height of ordinary floors can meet the height of sauna room, but some people like to install low ceiling, so pay attention to the height when installing ceiling.

2. If your bathroom is only about 4 to 5 square meters, we suggest that you make a single sauna room;

If your bathroom area is about 10 square meter, we suggest that you install a sauna room for two people. But it doesn't matter if you plan it yourself, because the sauna room is installed on site according to the size of the site, so you can construct it on site according to the shape or area of your bathroom. The length, width and height can be determined on site, and the minimum area is between 100CM× 100CM. If you do a separate dry steaming room, you should also be equipped with corresponding shower equipment. Of course, you can buy a separate shower room in the bathroom, which can save a lot of places, but the bathroom with a dry steaming room should not be less than 5 square meters. The minimum occupied area of the dry and wet sauna room is about 2 square meters, so the bathroom should not be less than 10 square meters, because toilets and sinks should be installed.

3, the circuit is the safest for a single 380 volt circuit;

At present, the power in steam shower room is mostly 3500 watts, and the smallest is 1800 watts; The electric furnace power of dry sauna is generally 3000 -4000 watts, so before ordering sauna equipment, be sure to find out whether the electric meter at home can withstand large load current. Designers suggest that the installation of sauna room must use 380-volt circuit alone, and can not be mixed with other circuits in the home, otherwise it will damage other electrical appliances in the home.

4. The waterway dry steaming sauna room does not need a water inlet, but it must have a floor drain;

The water inlet and outlet of steam shower room are fixed. After the model and location of the shower room are determined, it is necessary for manufacturers and decoration workers to coordinate and keep the inlet and outlet pipes in a suitable position. Generally, the inlet pipes are DN 15 and DN20, and the outlet pipes are DN40 or DN50. The dry sauna doesn't need a water inlet, and there should be a floor drain below. Dry sauna and wet sauna generally combine the water outlets and only need a floor drain connection.

I hope my answer is helpful to you.