Traditional Culture Encyclopedia - Hotel accommodation - Who can help me explain how to use and maintain the floor washer? You'd better also introduce the vacuum cleaner by the way.
Who can help me explain how to use and maintain the floor washer? You'd better also introduce the vacuum cleaner by the way.
I. Routine inspection
1, fuselage and water tank: ① Check whether the clean water tank and sewage tank are seriously scratched or damaged. (2) Check whether the clean water filter is blocked or has too much dirt. ③ Check whether the clear water discharge is blocked. Check whether the suction protective net or protective cover of sewage tank is unblocked. (4) Check whether the sewage tank cover is tightly covered and whether there is air leakage.
2. Suction scraper: ① Check whether the suction pipe is broken. Check whether the angle adjustment of the scraper is normal. (2) Check whether the tightness of the joint between the suction scraper and the suction pipe is appropriate and whether there is air leakage. (3) Check the wear degree of the absorbent strip, and replace it in time if it affects the water absorption effect. ④ Whether the suction scraper is installed and disassembled smoothly.
3. Brush tray: ① Whether the brush tray is installed and removed smoothly. (2) check the wear degree of brush hair and brush buckle. ③ Check the rotating shaft for sundries. (4) Check whether the brush plate and suction scraping anti-collision wheel are normal.
4. Power supply: ① Check whether the power cord is damaged or leaked. ② Check whether the power cord connector is loose and oxidized. (3) Check the battery. The battery liquid concentration of each cell is consistent, and the concentration after full charging is 65438 0.28 (20℃). (4) If there is any imbalance, it should be handled in time. (This item is not required for maintenance-free batteries)
Second, the operation check 1, check whether the power switch for water absorption and dish washing is normal. 2. Check whether the lifting operation of the brush tray and suction shovel is normal. 3. Check whether the front and rear drive and speed regulating switches are normal. 4. Check whether the braking operation and seat safety switch are normal. 5. Check whether the pressure adjustment of the brush tray is normal. 6. Check whether the water regulating switch is normal. 7, check the suction, pay attention to the ground water absorption is ideal, the fuselage and throat leaks. 8. Check whether the automatic protection device is normal after the sewage tank is filled with water. 9. Check whether the machine warning indicator is displayed normally after the sewage tank is full of water and there is no clear water. 10, check whether the charging current of the charger and the cooling fan work normally. 1 1. Pay attention to whether there is abnormal sound or excessive noise after starting the suction motor and brush motor. 12, check whether the lubrication of all moving parts is smooth, and add proper amount of lubricating oil if it is abnormal.
Brush plate of washing machine: there are two kinds of brush plates, one is called brush, which has less pressure on the ground and is generally used to clean the floor that is not very dirty, and has little damage to the ground, and is suitable for floors such as epoxy resin; The other one is called the dial, which is used with the cleaning pad. Because of its large contact area with the ground, it is mainly used for oily and dirty ground.
Cleaning pad: the cleaning pad is mainly used to match the dial. According to the actual situation that the ground needs to be cleaned, which color cleaning pad should be equipped (generally speaking, the darker the color, the greater the friction on the ground).
Usage: It is mostly used as floor washing equipment in hotels, parks, squares, factories and workshops. Full-function, high performance, suitable for surface cleaning of hard floors such as ceramic tile floor, stone floor, epoxy resin floor and emery floor.
■ For our fully automatic floor washer, it is important to:
Persisting in long-term cooperation with you is our goal from beginning to end.
You put forward the task and we will discuss the solution together. Your question is both a challenge to our work and an inspiration to us.
We try our best to help us pay attention to the current effect of our work and look at your problems from your standpoint. We attach great importance to your idea!
It has become our habit to delve into the problem of sharp corners. Special problems require special solutions. Originality, exploration and health.
Pragmatism plays a decisive role in it.
We pursue the highest precision and the highest quality.
Welcome to consult other information of our company. Welcome to contact us immediately!
Using the correct method has a great influence on the life of the washing machine, and daily maintenance is also very necessary for professional washing machines. This kind of water working machine needs simple maintenance every day or after completing cleaning tasks.
1. After the work is finished, the carpet brush or the floor brush of the washer should be removed for cleaning, so as to avoid the deformation of bristles caused by long-term compression of the machine;
2. Wipe the power cord with a dry cloth, wind it and hang it on the machine;
3. After use, put away the detergent in the water tank of the washing machine, then add half a box of clean water to the water tank, continue to put it away, and thoroughly clean the detergent crystals in the valve of the water tank, otherwise it will affect the water output or cause water leakage;
4. Wipe the machine body and machine board (outside and bottom) with a dry cloth;
5. Put the machine in a dry and ventilated place to avoid the influence of wet environment on the washing machine motor and shorten its service life;
6. Empty and clean the sewage tank. During the operation of the washing machine, the water mixture containing sludge is inhaled, which is easy to accumulate in the water tank and emits an unpleasant smell. So clean the water tank with running water.
7. Empty the water tank of the floor washer, especially if it is not cleaned every day, otherwise the accumulated water will become the source of bacteria.
8. Cleaning the water-absorbing filter screen will sometimes produce some precipitates, which will weaken the absorption effect. Please clean the filter with running water;
9. Check whether the scraper is clean;
10. Check the abrasion of the brush tray and dust scraper of the floor washer once a week. If the ground is very rough, the strong pressure on the ground will damage these accessories or accelerate their wear. In general, the brush tray can be replaced after 50 hours of use. On the contrary, after 30 hours of use, the absorbent tape should be replaced or turned up and down (when the four sides of the tape are still available);
1 1. Check the water suction filter regularly, sometimes the filter will be blocked by water impurities, thus affecting the outflow of water during floor cleaning;
12. Clean the suction pipe connected to the suction scraper, even if it is partially blocked, the water absorption effect will be weakened.
The washing machine, also known as the washing machine, is composed of a machine body, a water tank and a motor, and is driven by the rotation of the motor to scrub the ground. Mainly used for cleaning hard stone floors, it is one of the indispensable cleaning equipment for floor cleaning. It can be said that it is the most important part of the washing machine.
There are two types of floor washers, single-disc and multi-disc, with various models, such as size 20.3-50.8cm (8-20ft), speed 150-300 rpm and power 180- 1500W. When using, different models should be selected according to different workplaces and purposes. Generally, a 43.2-48.3 cm (17-19 feet) floor washer is used to clean the floor, and a 25.4-35.6 cm (10-14 feet) floor washer is used to clean the stairs and toilets.
When washing the floor, choose different discs and discs according to different ground conditions. Usually clean the smooth ground and use different types of floor mats; Use nylon to clean uneven ground. Mats are made of nylon, mineral abrasives and other non-woven fabrics, which are classified according to thickness and hardness and usually expressed by color.
1. Operating instructions: 1. Install the floor mat and disc, and fix the floor mat, disc and machine body together with screws. 2. Add clean water and detergent into the water tank in proportion. 3. Adjust the handle to a height suitable for operation, plug in the power supply and press the adjustment switch. 4. Operate the machine forward from the place closest to the power socket to prevent the machine from rolling over the power cord.
2. Precautions for use: 1. When washing the floor with a mat, always pay attention to the degree of wear of the mat. If the floor mat is found to be damaged, it should be replaced in time to avoid damaging the disc or. 2. When water and detergent are injected into the water tank, be careful not to wet the motor. 3. When operating, don't leave the handle, just let go of the joystick to avoid the fuselage colliding with other glass objects. 4. After use, please cut off the power supply after the washing machine stops completely. Then, remove the brake disc and floor mat.
Iii. Maintenance work: 1, cleaning the fuselage and accessories. 2. Wipe the wire with a dry rag, wind the wire and hang it on the hook of the fuselage, and store the machine in a dry place.
- Related articles
- How to wash bed sheets in a five-star hotel
- How many five-star hotels are there in Changping, Dongguan?
- Brief introduction of Suzhou Xiangshan International Hotel
- /kloc-what was the name of Xi Diplomatic Academy before 0/998?
- How long does it take for Chengdu Xinjin Middle Transition to Chongqing Fuxing Middle Transition?
- What are the details of the movie My Savage Girlfriend? !
- Can the hotel call the police if it cheats consumers?
- Shexian Home Inn
- Isn't a hotel that doesn't hang stars good?
- Experts remind the bridesmaid incident in Shandong marriage