The construction load of the operation floor shall meet the design requirements and shall not be overloaded or fixed on the frame.

The construction load of the operation layer shall meet the design requirements and shall not be overloaded. Template support, cable wind rope, pumping concrete and mortar pipe shall not be fixed on the frame.

Excerpted from Article 5 of Safety Technical Specification for Fastening Steel Pipe Scaffolding in Building Construction. Its whole content is:

1, fastener steel pipe scaffold installation and removal personnel must be qualified professional scaffolder. Scaffolder should hold relevant certificates. ?

2, scaffolding personnel must wear safety helmet, fasten your seat belt, wear non-slip shoes. ?

3. The scaffold component quality and erection quality shall be inspected and accepted according to the provisions of Chapter 8 of this specification, and can only be used after passing the inspection. ?

4, it is forbidden to punch holes in the steel pipe. ?

5. The construction load of the operation layer shall meet the design requirements and shall not be overloaded. Template support, cable wind rope, pumping concrete and mortar pipe shall not be fixed on the frame; It is forbidden to hang lifting equipment, and it is forbidden to dismantle or move the safety protection facilities on the rack. ?

6, stent in the process of use, should be equipped with personnel to supervise the construction, when there is an abnormal situation, should stop the construction, and should quickly evacuate the personnel on the operation surface. After taking measures to ensure safety, find out the reasons, make judgments and deal with them. ?

7, the actual load at the top of the support frame shall not exceed the design requirements. ?

8, when there is a level 6 and above winds, fog, heavy rain or heavy snow weather should stop scaffolding and demolition work. Anti-skid measures should be taken for shelf work after rain and snow, and snow should be removed. ?

9, unfavorable for scaffolding and demolition work at night. ?

10, scaffolding safety inspection and maintenance, should be carried out in accordance with the provisions of section 8.2 of this specification.

1 1, scaffolding should be laid firmly and tightly, and the bottom should be covered with a safety net. Below the construction layer, the safety net should be closed every 10m. ?

12. Single-row and double-row scaffolding and cantilever scaffolding are fully enclosed along the periphery of the wall. A dense mesh safety net should be set on the inner side of the external vertical pole of the scaffold, and it should be firmly bound with the frame body.

The following are the precautions for operation and construction:

1. Safety first: Before construction, a comprehensive safety assessment and risk analysis must be conducted on the site to ensure that there are no dangers or potential safety hazards during construction, and corresponding safety measures and emergency plans should be formulated.

2. Construction plan: Make a detailed construction plan, including construction time sequence, required materials and human resources. , to ensure orderly and efficient construction.

3. Site cleaning: Before construction, the site sundries must be cleaned to ensure that the construction space is spacious and easy to operate.

4. Selection of tools and equipment: Choose appropriate tools and equipment to avoid using aged or damaged tools and equipment, so as not to affect the construction quality and safety.

5. Personnel training: provide necessary training and guidance to the construction personnel to ensure that they master the correct construction methods and safety knowledge.

6. Quality supervision: In the process of construction, comprehensive quality supervision and inspection are needed to ensure that the construction conforms to specifications and standards.

7. Environmental protection: Environmental protection should be paid attention to during the construction to avoid affecting the surrounding environment and ecology.

8. Civilized construction: Civilized construction is required in the construction process, and local laws and regulations and social ethics shall be observed, so as not to affect the normal life and work of the surrounding residents.

9. Completion acceptance: After the construction is completed, conduct a comprehensive completion acceptance to ensure that the construction quality meets the requirements, and handle relevant formalities and certificates.