How to use Huawei Glory V9?

To use NFC, you need to turn it on first. The steps are as follows: open the settings and click more > NFC to turn on the NFC switch. There are three NFC functions:

1. Quickly and quickly transmit information and files through NFC: First, please make sure that the screens of both devices are unlocked, and the NFC switch and Huawei Beam switch are both open. If there is a read/write/point-to-point switch on the NFC interface, please turn it on.

1) The sender selects information to share in the mobile phone, such as web pages, contacts, pictures, videos, etc.

2) Near the NFC sensing area of two devices. After the connection is successful, the sender's mobile phone sends out a prompt tone, and the interface to be shared becomes smaller.

3) According to the screen prompt, the sender clicks on the screen of the mobile phone, and the information will be transmitted to another device synchronously. After the transmission starts, two nearby mobile phones can be separated. After the transmission is completed, you can view the received pictures, videos and installation packages by entering NFC.

2. Mobile phone pays by NFC: SIM card supporting NFC-SIM function needs to be installed on the mobile phone. If you are not sure whether the SIM card supports NFC function, please go to your operator's business hall to replace the SIM card supporting NFC-SIM function. You can use your mobile phone to pay on bus card readers and POS machines that support NFC.

1) Insert the SIM card into the card slot supporting NFC function.

2) Turn on the NFC switch. The NFC security chip selects the SIM card supporting NFC function, and the default payment application selects the corresponding operator wallet application.

3) Open the wallet application of the operator, bind the card and deposit according to the prompt. When the payment amount is displayed on terminals such as bus card readers and POS machines that support NFC function, you can easily pay by touching the mobile phone to the terminal sensing area with the touch payment logo.

Remarks: This mode supports power-off card swiping, but NFC switch must be turned on before power-off and payment function can be used normally after power-off.

3. Charging the object through NFC:

1) Make sure the NFC function is turned on: Please go to Settings >; More > NFC "to ensure that the switch is on.

2) Download corresponding applications, such as WeChat, Alipay and Wing Pay.

3) Find the sensing area of the NFC of the mobile phone.

4) Place the bus card in the NFC sensing area on the back of the mobile phone.

5) Select the corresponding application from the recognizable application that pops up. For example: Beijing bus card, please choose WeChat, Alipay, Hungry, etc. Wuhan bus card can choose wuhan tong.