Where are the hotel cameras most easily installed?

Hotel cameras are most likely to be installed in sockets, on magnetic suction, in the seams of cushions or sofas and in corners.

first, it's in the socket. Because the position of the jack is relatively small, at the same time, everyone thinks it is difficult for the camera to head in such a small hole. In fact, with the development of science and technology, miniature cameras have long appeared. Can only be absorbed in the jack by magnetic force, if you don't look carefully, you may not find it.

Therefore, before staying in the hotel, you can use the flashlight or the flashlight that comes with your mobile phone to illuminate the jack to see if there is any reflection. If there is, it means that the reflection from the camera appears. ?

the second is magnetic attraction. In hotels like high-end hotels, there will be small refrigerators, or pictures will be hung on the blackboard newspaper by magnetic attraction. The surface pattern of the magnetic attraction is also varied. The criminals just use the pattern as a cover-up to install the miniature camera in the back. If you don't take off the magnetic attraction, you have no idea that there is actually a monitoring camera behind this smiling face. ?

The third place is in the seam of the cushion or sofa. Similarly, it is also a blind eye method, using the lines of the sofa or opening a small hole in the inconspicuous position of the sofa, and then inserting the camera. In this way, you can only touch it by hand. If you touch a hard object or a bump, you can open it to see if there is a camera inside. ?

finally, there is the corner. All the cameras will point to the bed, and the corner position is the best, which can see the whole room at a glance. So when you enter the hotel, you might as well look at a few corners and see if there are any suspicious hangers. ?

How to check whether the hotel has a camera

1. Turn on the camera function of the mobile phone?

Turn off the lights in the room and close the curtains, so that there is no light in the room and it is in a dark state. The darker the room, the better the inspection state. Then turn on the camera function of the mobile phone, turn around the room, and check the dead angle and ceiling of the room. Television, air conditioning and other places where pinhole cameras may be installed. If there is a pinhole camera, you will see a red dot on your phone.

2. Infrared rays

Some pinhole cameras will use infrared rays (less) at night. Therefore, you can turn off all the lights in the room, let the room be in a dark state, turn on the camera function of the mobile phone, and shoot at various positions. If there is a red dot on the screen, it means that a camera is installed.