How to brush the fire boiler

Gas stove countertops are generally divided into stainless steel countertops, glass countertops, panels and enamel panels. The glass countertops of gas stoves are the most common and the best to clean.

After each use, wipe it with scouring pad dipped in detergent, and then wipe it with a clean rag. Never wipe the glass countertop with steel wire. The strength of tempered glass is several times that of ordinary glass, mainly because it has protective layers (also called stress layers) on both sides, but the protective layers are very thin. Once you encounter a hard object or clean the surface with steel wire, it is easy to scratch, the protective layer is damaged, the strength is reduced, and the countertop is easy to burst.

Second, the gas stove is clean.

There are many sanitary dead corners in the range of gas stoves, which are difficult to clean even if you want to. When cleaning, you can remove the stove from the stove. You can use the method of "boiling" to clean, fill the pot with water, put the hob to be cleaned into the pot and cook it, and add a little detergent. As soon as the water is hot, the oil will peel off automatically.

Clean the ignition holes of three gas stoves.

The air outlet of the control burner of gas stove is often blocked by soup, which leads to incomplete combustion and insufficient firepower. You can take the stove down, face the light, and clean the air holes with a toothpick. Carbide and coke chips accumulated on the furnace can be removed with a small fine brush, or fire holes can be pierced with fine iron wires one by one.

Gas stoves are a place with potential safety hazards. Therefore, in daily use, in addition to keeping clean, special attention should be paid to checking the rubber hose of the gas stove. If there are signs of aging, cracking, burning, being bitten by rats and insects, it should be replaced in time to prevent accidents such as fire and gas poisoning caused by air leakage.

I hope it helps.