Traditional Culture Encyclopedia - Hotel franchise - Electric dining table installation methods and steps
Electric dining table installation methods and steps
Electric dining tables are generally used in hotels and restaurants, but with the popularization of technology in furniture products, many home users will also choose electric dining tables. Electric dining tables are different from ordinary dining tables, and their installation will also be It’s a little more complicated, so let’s take a look at how to install the electric dining table.
1. Preparations before installation of the electric dining table:
1. Select the position, determine the center, and place the roller flat;
< p> 2. Place the steel frame on the drum and level it;3. Place the turntable on the steel frame and level it;
4. Connect the motor controller power supply and check whether the rotation is Normal;
5. Install the feet and enclosure;
6. Install the ring-shaped dining table;
7. Turn on the power and the installation is completed.
2. Detailed steps for installing the electric dining table
1. First use a ruler to measure the overall size of the table after installation (open the ruler and adjust it to the radius of the table, place it in the center of the roller and rotate it , adjust to the appropriate position), and then place the drum flat at the appropriate installation position;
2. Place the steel frame flat on the drum so that they are concentric, install the screws, and fix;
3. Place the turntable (glass plate, marble plate or wooden board, etc.) flatly on the steel frame, make the three concentric, install the screws, and fix it;
(If the turntable of the dining table Equipped with an induction cooker, place the induction cooker at this time, insert the plug of the induction cooker into the socket of the drum, and fix the power strip on the drum to the turntable with screws)
4. Connect the motor on the drum to the controller, and then Turn on the power, check whether the turntable rotates normally, and cut off the power when normal;
5. Install the feet and the hoarding, and level them. The feet and the hoarding are fixed with screws (when the hoarding installation is almost completed, Pay attention to installing the controller where there are holes in the hoarding and connecting it to the motor on the roller);
6. Install the ring-shaped dining table, level the dining table and fix it with screws, and then screw it with the feet Fixed;
7. Connect to the power supply and turn on the switch to use. (The switch is set by the user. It can be a wall switch or a remote control switch. It is recommended to be operated by the waiter. The rotation starts when the dishes are served and stops after the guests leave. Generally, dining tables are equipped with remote control switches)
- Previous article:Who can introduce Tongji University to me?
- Next article:Can a European tourist family of three share a room?
- Related articles
- How about Yunfu on Hezhang River?
- 165438+1October 14 All day in Beijing, there were 303 newly confirmed cases and asymptomatic cases 159 cases.
- What is the most prosperous place in Ya 'an?
- Can Nanjing Dragon Valley Theme Park be played at the age of 3?
- What does Radisson do on all floors of Shangyu?
- Foreign illustration lines-do you know these six common illustration poster styles?
- How to get to Lijiang Waterfall Hotel from Guilin North Railway Station?
- What is the sales service hotline of Zhuhai City Blog Mansion?
- Introduction to Sanya Evergrande Hotel
- Provisions of Beijing Municipal People's Government on Delineating Isolation Zones on Both Sides of Urban Main Roads