How to choose the bed rail? How to install the bed rail?

Beds generally have fences, especially for children to get on and off the bed. So, how to choose the bed rail? How to install the bed rail? We will explain it for you.

How to choose the bed rail?

1, please know what kind of bed you have.

First, make clear the type of bed. If it is a flatbed car, you need to put a bed rail on the mattress, but the flatbed car includes: simple logs and wood, beds with boxes, etc.

Embedded beds also have grooves, and mattresses should be embedded in the grooves. Embedded bed also includes: wide bed edge, hard bed edge, etc.

2. Grasp the characteristics of guardrails on the market at present.

If you want to use it conveniently and quickly, you can choose the folding bed railing, and you can also remove it when not in use. This kind is more suitable for flat bed. But whether it can be completely dismantled depends on the height of the tablet bed, so when buying, you must pay attention to whether the height of the bed rail matches the height of your own bed.

The embedded bed can also be detached from the bed railing, but the bed has no edge, so it can't be completely folded down. If some bed rails are used to lift the hinge, the effect will be better, but it can't be completely perpendicular to the bed. Because there is an edge between the bed rail and the bed, there will be a certain inclination after folding down, and the inclination depends on the thickness of the bed edge. One thing to note here is that the bigger the hinge, the more docking positions, and the bed rail will shake.

How to install the bed rail?

1. First remove the fixer and fix it at 90 degrees.

2. Insert the fixing screw into the locating hole and fix it with the matching nut.

3. Take out the supporting feet, insert them into the corresponding fixers respectively, and fix the buckles.

4. Remove two elbow connecting rods and connect the middle two sides.

5. Fasten the spring on the clamping hole of the connected elbow connecting pipe.

6. Put the Oxford mesh cloth on the connecting rod of the elbow.

7. The elbow connecting rod is connected with the fixer.

8. Fix the spring buckle.

9. Smooth the Oxford grid.

10. Remove two connecting pipes and tighten the spring buckle.

1 1. Pass the connected connecting rod through the connecting seam under the mesh cloth.

12. Insert one end socket into the positioning interface of the fixer and fix it.

13. Press the spring buckle of the connecting rod at the other end to push the pullover back inward.

14. Insert the precise positioning interface of the retainer, and then pull it out of the lock.

15. Pull up the Oxford mesh hook and loop buckle and fasten it.

16. Put the finished bed rail into the mattress to relax and compact it.

17. Just lift the fixing devices on both sides and put down the bedrail.

18, assembly realization.

It can be seen that the choice of bed rail must be clear about what kind of bed it is, master the characteristics of guardrail on the market at present, and pay attention to the technology and every detail in the installation of bed rail, so as to install bed rail quickly.