What is Boeing film for?

Boeing film is a kind of decorative film, which can be divided into self-adhesive Boeing film with glue and Boeing film without glue. We usually use Boeing film with glue, and the lining paper can be directly attached to the surface of the object. Adhesive-free Boeing film is mainly used in industrial manufacturing, and is attached to the surface of an object by means of a laminator.

Boeing film feature

Environmental protection, non-toxic, no need for paint, so that people can stay away from all kinds of discomfort and odor brought by traditional decoration.

The on-site construction speed is fast, which effectively shortens the construction period and reduces the cost.

Can be scrubbed for a long time, keep the surface clean and have good antifouling effect.

Both plane and curved surface can be constructed, which can make up for the shortcoming that traditional decorative boards can not be bent.

Good decorative effect. According to different textures, Chengxin Boeing film can be divided into wood grain, plain color, marble, cloth pattern, gold and silver drawing and so on.

Where can Boeing film be used?

PVC Boeing film has a wide range of uses, which can be used for the decoration of various counter display cabinets, indoor walls and ceilings, as well as wardrobes, cabinets, tea cabinets, bathroom cabinets, desks, mirror cabinets, speakers and other furniture. Application fields include residence, hotel, exhibition, office building, shopping mall, airport, hospital, school, restaurant, KTV, gym and so on. Sticking substrates include the following five categories:

1, wood board, including solid wood, plywood, density board, joinery board, etc.

2. Metal materials, including stainless steel plates, aluminum-plastic plates and galvanized plates;

3. Glass materials;

4, blank metope, besmear brushs varnish (or basement membrane) for the first time on the base surface is better;

5, others, gypsum board, calcium silicate board, etc.

How to paste Boeing film?

Step 1: Measure the surface size, length and width of the pasted object.

Step 2: according to the size of the pasted object, cut the Boeing film for later use.

Step 3: Tear the backing paper on one side of Boeing film in parallel.

Step 4: Align one side of the pasted object so that the Boeing film is parallel to the pasted object, and paste the Boeing film on the surface of the object.

Step 5: Tear the remaining liner paper slowly, and scrape it out from the middle to both sides with a scraper to scrape out the gas, so as to firmly stick the Boeing film on the surface of the object.

Step 6: After pasting, cut off the excess Boeing film along the edge.

Matters needing attention in pasting Boeing film

The sticking process of Boeing film requires higher requirements. When pasting, use a brush to exhaust the air, and no air bubbles can be left. If there are bubbles after sticking, you can puncture them with a needle to vent the air. In addition, when choosing Boeing film, Chengxing Boeing film with air guide groove in the background can be selected, and air can be discharged along the air guide groove, which is beneficial to adhesion.