How to open the wire box on the decorated wall

The outlet box on the wall can be used to bury wires, pipes or wires, making the wires more beautiful and tidy. Unpacking is also an essential step in wall decoration. The following are the specific steps of unpacking:

1. First, determine the position and size of the open box, according to the needs or direction of buried wires and pipelines, and then mark the position and size of the open box on the wall with a pen or a rolling pin.

2. Then use a hammer and chisel to knock the predetermined box size on the wall, and the opening of the box should meet the design size, neither too big nor too small.

3. Remove the sundries at the opening to ensure that the bottom of the box is flat.

4. Before installing the junction box, determine the type and model of the junction box to be installed. The junction box shall be marked with information such as voltage and current, including the number and size of connecting wires.

5. Install the junction box to the predetermined position. If fixing is needed, drill a hole in the opening and fix it with bolts.

6. If the box has a special mounting bracket, you can first mount the mounting bracket on the wall, and then fix the box on the mounting bracket.

7. Finally, lead wires, pipes or wires into the box and connect all wires.

8. Check whether all wire connectors are firm and tight, and whether they are in good contact or fall off. After the installation of the box is completed, it shall be closed after being checked and confirmed according to the corresponding standards.

The above steps are unpacking, but if you encounter any difficulties or problems in the use of the Western Wall, you'd better ask professionals to install it, and the effect will be better.