What is the general size of hotel supplies?

1. Bed skirt:

200*120 25 bed skirt is buckled on the bed body. If it is too small, it cannot be put on; if it is too big, it will cause the skirt to sag or drag the floor. , or uneven. Therefore, the most suitable length and width dimensions of the bed skirt are: 2-3cm larger than the bed body when tightened. Many beds have legs, so the thickness of the bed before entering the hotel is a useless measurement. The measurement from the edge of the bed to the ground must be used as the basis for the bed skirt. Recommended height: 2cm from the ground.

2. Bed pad:

Put 202*122 on the Simmons pad to make the sheets compliant and not slipping. The measurements I use now are before washing. The size of the styling cotton should be adjusted to: 120g/m2-210cm, 140g/m2-211cm, 160g/m2-212cm. Since it is a cheap small dye vat fabric, it has a lot of dirt and large color differences, so it is not advisable to insist on uniformity.

3. Comfort pad:

200*120 8. The function and position are the same as the bed pad, but more warm and comfortable. Since there are linings all around and in the middle, the finished product has little flexibility. Therefore, the size of the flattened and natural laying should be: 200±1*120±. The fillings are mostly 10 pieces of wool, which are thick and can support people.

4. Sheets:

Put 280*200 on the comfort cushion, wrap the four sides downward under Simmons, and press it down. To wrap Simmons without spreading out, at least 10cm should be pressed on all four sides. Therefore, the net size of a 120cm sheet should not be less than 120 40 20 = 180cm. Based on a shrinkage rate of 7, the minimum size for receipt is 190cm. Starting from mid-range, press down 15cm, and the required size becomes: (200 80) * (120 80) -- 280 * 200. When customers have lower price requirements, due to the blocking effect of the bed head, the length can be reduced to 270cm, becoming: 270*200.

5. Bed bag:

200 *120 29 The function of the bed bag is the same as the bed sheet, except that a circle of elasticity is added around it to facilitate the waiter's operation, and it can be pressed down 8-10cm.

6. Quilt cover:

245*200 quilt cover is placed on top of the bed sheet, and the core is inside when making the bed. The minimum requirement is that the Simmons mat must be blocked after it is laid. The minimum droop is 25cm (the quilt cover droops on three sides), 120 50 = 170, due to shrinkage, it is set to 180cm, and due to the padding, it is set to 190, that is, the delivery size: (200 35) * (120 70) -- 235* 190.

The mid-range sag increases to 30cm, and an additional 5cm is added to the length due to bed-making. The delivery size becomes: (200 45) * (120 80)--245*200.

The droop should not be too large. When it exceeds 35cm, the two corners will have drooped to 50cm and touch the ground.

The opening of the quilt cover is at the foot, which is the entrance and exit of the quilt core. For the convenience of the waiter, the opening should be larger. Generally, 50cccmmm can be sealed on both sides. If there are straps on the two corners of the quilt head, There is no need to add straps in the middle of the opening, but it is better to add straps to the two corners of the quilt. The head of the quilt should be in contact with the guest's neck, and should be as comfortable as possible without adding random decorations.

The frame can be embroidered at the flash. At this time, attention should be paid to matching the size of the quilt core. The logo can be embroidered in the lower right corner, with the header facing the neck. The outer edge of the logo should be 5cm away from the side flash and 5cm away from the opening flash. , the position on the cut cloth is: 17cm from the opening edge (in the case of embroidery with a 7cm strip, 12cm), and 11cm from the side.

When there are jacquards, prints, embroideries, words, and store logos with clear directions on the quilt cover: the flower head, word top, and logo top are toward the neck, and the flower roots, word bottom, and logo bottom are toward the opening.

7. Quilt core:

Put the quilt core inside the quilt cover. Therefore, its size is determined by the quilt cover.

When the quilt cover fabric is made in door width, remove a 5cm flash from the length, and then remove 10cm after shrinking (shrinkage in the weft direction is 4, 245*0.04=10cm). The final length is 300cm; remove 10cm from the width. Then remove the shrinkage of 14cm (the meridional shrinkage is 7, 200*0.07=14cm) and the final width is 174cm. 230*175

When the width of the quilt cover fabric is widened, remove a 5cm flash from the length, and then remove 17cm after shrinking. (The warp shrinkage is 7, 245*0.07=17.1cm) The final length is 223cm; Remove 10cm from the width, and then remove 8cm from the shrinkage (4 cm in the weft direction, 200*0.04=8cm), and the final width is 182cm. 225*180.

The quilt core is stretchable, so the size can only be small (2-3cm), not large. Based on the cotton side, the empty side will not be counted.

8. Pillowcases:

88*58 12 standard rooms are generally equipped with 2 pillowcases per bed, and the fabric is the same as the quilt cover.

The optimal size of the pillowcase is 58*88. You can use 183 width fabric 61*3=183. According to customer requirements, it can also be 90*60 (but use 260 width) and 55 *85 (It is best to use 240 width).

Pillowcases are filled with cores and placed across the bedside, so the strips of fabric should be along the length direction.

The direction of the pillowcase can be changed, so the direction of the small flowers and store logo on it is not strictly fixed.

A frame can be embroidered on the flash edge, and the store logo can be embroidered on the lower right corner.

9. Pillow core:

75*45*700g pillow core is placed inside the pillowcase and placed on the bed, so the size must match the pillowcase.

88*58 pillowcases are generally equipped with 75*45*700g pillow cores (high elastic cotton). Hotels with four stars and above mostly use 90*60 pillowcases with 80*50*800g pillow cores (high elastic cotton).

The pillow core is installed in the pillowcase. The fabric does not need to be too expensive, just use T/C96*72 and T/C110*76. For fillings that are easy to drill out (such as down velvet, down, etc.), anti-down cloth should be selected as the fabric, usually with 80*50 cores.

10. Cushion cover:

50*50 Similar to pillowcase, it is also filled with core and placed on the bed. But cushion covers mostly use decorative fabrics, and pillowcase fabrics are rarely used. Cushion covers made of white cloth are ugly.

Cushion covers have square corners and rounded corners. Square corners are recommended because they are easy to process and have better quality. When processing rounded corners, it is difficult to control the roundness, the opening is small, and the quality of the finished product is difficult to guarantee.

The cushion cover has a 1/3 opening on the back (with a zipper cover) and a side opening. The side opening can be covered or uncovered (use an invisible zipper when there is no cover). The advantage of the side opening is that it is in the right place. The reverse side can be used, but the back opening can only be used on one side, which is inconvenient for guests. Side opening recommended.

The size of the opening is very important. If it is small, it will be difficult to insert the core and it will easily tear. You can leave a margin of about 3cm on both sides of the zipper.

11. Cushion core:

52*52*450 The cushion core is similar to the pillow core. It is placed in the cushion cover and placed on the bed, so its size must match the cushion cover.

The 50*50 cushion cover is usually equipped with a 52*52*450g cushion core. If it is too large, the cushion cover will be easily damaged when it is installed.

The cushion core is installed in the cushion cover. The fabric does not need to be too expensive, just use T/C96*72 and T/C110*76.

The above information is provided by Shenzhen Wanhua Hotel Supplies Co., Ltd. provided.