What should I pay attention to when buying hotel room furniture?

1. Is the material reasonable? Different hotel furniture has different surface materials. Such as the legs of tables, chairs and cabinets, the hard and miscellaneous materials are relatively strong and can bear the load, while the internal materials can be made of other materials; As long as the thickness of the wardrobe legs reaches 2.5 cm, it is too thick to be clumsy, too thin and easy to bend and deform; Kitchen, bathroom cabinets can not choose fiberboard material, because fiberboard will expand and be damaged when it meets water, it should choose plywood material; The dining table should choose water-resistant materials.

2. Does the moisture content of wood exceed the standard? The moisture content of hotel furniture should not exceed 12%. If the moisture content is high, the wood is prone to warping and deformation. When the general consumer buys, there is no testing instrument, so he can touch the bottom of the furniture or the place where there is no paint inside by hand. If he feels damp, the moisture content is at least 5%, so he can't use it at all. Another way is to sprinkle a little water on the unpainted part of the furniture wood. If there is no soaking phenomenon or it is soaked slowly, it means that the water content is high.

3. Whether the structure is firm: Small pieces of furniture, such as chairs, stools and clothes hangers, can be dragged on the concrete floor and gently dropped. If the sound is crisp, the quality is better; If the voice is hoarse and there is a murmur of cracking, it means that the mortise and tenon are not tightly combined and the structure is not firm. The writing desk and table can be shaken by hand to see if it is stable. You can sit on the sofa, and if you move it gently, it will creak and twist, and if you shake it, it will not take long. Square tables, bar tables, chairs and other legs should have four triangular clips to fix them. When selecting, you can turn the tables and chairs upside down and touch them with your hands.

4. Whether the four legs of the furniture are flat or not: You can know this when you put it on the flat ground. Take a look at whether the desktop is straight. You don't need to bow your back or collapse your waist. You can use a piece of glass to test it. If the desktop is convex, the glass plate will spin when you put it up. If the desktop is concave, the glass plate will break when it is put on. The seams of cupboard doors and drawers should not be too large, and they should be flat and firm, and the doors should not sag.

5. The stitching of veneered furniture is not strict: whether it is veneer, PVC or pre-painted paper, we should pay attention to whether the leather is flat, bulging, blistering and lax stitching. Look at the light when checking, or you won't see it. Fraxinus mandshurica veneer furniture is easy to be damaged, and it can only be used for two years. As far as wood veneer is concerned, the veneer with shaved edge is better than that with rotary cutting. The way to distinguish the two is to look at the wood pattern. The wood grain of planed veneer is straight and dense, and the pattern of rotary veneer is curved and sparse. The furniture covered with particleboard must be sealed at the landing part, otherwise it will absorb moisture and swell and be damaged. Generally, the corners of veneered furniture are easy to tilt up. When selecting, you can buckle the corners by hand. If you buckle up, it means there is something wrong with the glue.