How to reasonably purchase furniture for four-star hotel suites

Four-star hotel furniture purchase method;

Appearance quality,

The appearance quality of hotel furniture customization first requires the furniture desktop to be flat, fine in workmanship, exquisite in decoration and clear and beautiful in texture. Guest room furniture is usually based on particleboard, medium density fiberboard, joinery board and laminated board, with veneer, veneer and plywood as covering materials. Different substrate and cladding materials have different material properties. Failure to pay attention to material characteristics and correct use methods often leads to warping of plates. It is suggested that the structural characteristics of the covering materials on the back and front of the board must be the same or similar. Generally, the moisture content of the substrate is required to be 6~ 10%, and the selected materials should be in the same batch as far as possible. When processing in the workshop, shorten the loading time as much as possible, and pay attention to the different coating thickness, pressing time and pressure due to different material characteristics and different moisture content of covering materials.

Structural strength,

Hotel room furniture is mostly fixed furniture, and the general structure is mainly plate type. Wood screws, hardware connectors and adhesives are used as connection methods. Pay attention to different material characteristics when using materials, such as particleboard, medium density board and other materials with poor nail holding power. Don't use it in places that need frequent activities or strong nail grip, such as door hinge screws, bottom rail screws and other places that are easy to loosen and produce noise. Pay special attention to the hardware pendants on the bed screen and picture frame wall, and use wooden boards or boards instead of reinforcement. At present, the 45-degree inverted structure of wood square is popular.

Material cost,

Try to use low-priced materials while meeting the use requirements, and pay attention to using the same small materials while using large pieces of surface materials, so as to comprehensively improve the utilization rate of plates. Generally, there is a lot of guest room furniture. Try to arrange furniture reasonably by computer, comprehensively utilize large and small parts, and reduce material cost. Different structures should pay attention to the comparison of material costs.

Effective production

In the case of the same material cost, which material is easy to process and which process can save the process cost and improve the efficiency, especially in the process of vertical milling, planing and engraving, which material is easy to process and cut, smooth and tidy.

transportation equipment

Hotel floors are generally high, so hotel furniture is required to be light and easy to transport. In particular, some conjoined bed backs and some extended desks cannot be transported by elevators, and the freight elevators are generally dismantled when furniture is installed. How to transport them safely needs special consideration from the aspects of material weight and structure.

I hope it helps you.