Traditional Culture Encyclopedia - Hotel franchise - How to maintain the automatic revolving door if it is broken?

How to maintain the automatic revolving door if it is broken?

First, the revolving door body does not turn. Solution:

A. check whether the power supply trips, and then turn on the power supply.

B. If the key is not turned on, just turn on the key switch.

C. After pressing the emergency stop button, release it.

D, the anti-pinch contact belt is deformed, and the anti-pinch contact belt can be checked and corrected.

E. If the safety light deviates or is damaged, clean and correct the safety light; if it is damaged, replace the safety light.

If the door leaf anti-pinch probe fails, clean the anti-pinch probe and replace it if it is damaged.

Second, the revolving door body stops after turning to the door. Solution:

The lintel anti-pinch probe is induced by the brush, so it is only necessary to adjust the induction direction of the probe.

B. If the lintel anti-pinch probe fails, clean the anti-pinch probe and replace it if it is damaged.

Third, the solution to the slow rotation of the door body:

Press and release the slow button.

B. If the slow light of the door body deviates or is damaged, just clean and adjust the slow light.

Fourth, the revolving door does not work to display the fault code solution:

The fault code is 0-00, the transmission signal line is connected reversely, and the line connection is correct.

Five, the revolving door body intermittent stroke solution:

The anti-collision light is too close to the frequency converter, and the interference caused by unreasonable wiring. Keep the safety light away from the frequency converter and replace the shielding wire.