Advantages and disadvantages of dry-wet separation

For many perfectionist property buyers, when buying a house, they will choose a house according to their own preferences and will not consider buying a slightly unsatisfactory house. Some property buyers like houses with wet and dry bathrooms, but this type of house is not without its shortcomings. Property buyers should know clearly before buying. What are the advantages and disadvantages of wet and dry bathrooms?

What are the benefits of wet and dry separation in the bathroom?

1, with high security.

After wet and dry separation, it will not slip because of water splashing on the floor, and some electrical appliances in the bathroom space can also reduce the corrosion of water vapor and reduce the probability of accidents such as leakage.

2, increase the service life of the equipment

Humid air will invade the washing machine and wooden cabinet in the bathroom. For example, steam will corrode the motor of washing machine, make it rust, shorten its service life, and the wooden cabinet will be deformed due to moisture.

3. Health and environmental protection

If the closet of the washstand in the bathroom is left in the bathroom for a long time, the moisture will be relatively large, and it is likely to be corroded by water vapor for a long time, resulting in the peeling of the boards layer by layer. Moreover, if the closet in the bathroom is too wet, insects such as cockroaches and spiders are likely to haunt it.

Step 4 save and clean

Dry-wet separation design is simple and practical. Daily cleaning is also convenient, and the drying cabinet can be gently wiped with a rag.

5, good warmth retention

The design of dry and wet partition can make water vapor gather in a space, but it is only a matter of more or less, which can better avoid the spread of hot air and keep warm better than the bathroom without dry and wet partition.

6. Beautiful and beautiful

Dry and wet separation is specially designed, and the layout design is more reasonable and atmospheric. Usually the sink is placed outside the bathroom, and the bathroom is also separated by glass. When decorating, you can set the style according to your own preferences.

7. Improve the efficiency of the bathroom.

After the separation of dry and wet, it is equivalent to having an independent bath table, so there will be no conflict between going to the toilet and washing, especially when there are many people at home. With this layout, people can be separated and it is very convenient to use.

What are the disadvantages of wet and dry separation in the bathroom?

1, with high cost.

Although dry-wet separation has many advantages, it is not suitable for any apartment. To be exact, it is generally only suitable for existing new houses, which are relatively large units. Even if some old houses can be rebuilt, this project is troublesome and the cost is quite high.

2, large area requirements

Generally, wet and dry toilets require a large area, otherwise it will be crowded. Usually, separating this sink from the toilet requires an extra wall or door, which will increase the cost and so on.

3, the limitations are great.

It is very limited to let the bathroom alternate between dry and wet. Not all apartment types are suitable for dry-wet zoning. To be exact, dry-wet zoning is only suitable for existing new houses and large ones, such as second-hand houses, but not suitable. Even if some houses may be changed, it is ok, but the general project is more troublesome and the cost is higher.

4. Personal habits are different

Many people have been used to washing their hands directly after going to the toilet for many years, but apartments with dry and wet isolation must open the door to wash their hands outside, which will be more or less unaccustomed, especially living with the elderly.

How to design dry-wet separation?

1, fixed glass partition

Simply put, it is to use one or several pieces of glass as a partition to separate the dry area from the wet area. The advantages of this method are strong design sense, simplicity, and of course low cost. It should be noted that both are glass partitions, but there are many styles of glass, such as transparent glass, frosted glass, grille glass and so on.

2. Glass shower room

Glass shower room is also a relatively large method at present, which seems to be a standard. In fact, this is really a misunderstanding, because in addition to the glass shower room, there are at least eight other methods mentioned by Xiuchao. com。 There are four main shapes of glass shower room: straight, square, L-shaped, diamond, arc, etc., which should be selected according to your own space.

3. Half wall+glass

It is also a good plan to combine half a wall with glass. If the area is enough, this combination is more effective than a single glass. The advantage is strong, and half of the position is easy to bump. In this case, there is no need to worry that the glass will be damaged.