How about aluminum alloy external corner line and stainless steel internal corner line?

Exterior corner line is a decorative line used when laying tiles in decoration. It is made of PVC, aluminum alloy and stainless steel, and can also be a convergent strip or an outer corner strip. There is also a process called 45-degree angle, which can achieve a similar effect to the outer corner line. The outer corner line takes the bottom plate as the surface, and one side of it is made into a right-angle fan-shaped cambered surface, which is about 2.5 meters long. In order to fully connect with the wall and tiles, there are anti-slip teeth and holes on the bottom plate, and the bevel edge defined by the edge of the sector cambered surface is used to fix the tiles. According to the different thickness of tiles, the external angle line has two specifications, namely, large external angle and small external angle, which are used for 10mm and 8mm tiles respectively. The advantages of the outer corner line are simple installation, economy, good four-turn protection and avoidance of collision. Why do you want to make corner lines?

65438+

2. After a long time, there will be gaps in the joints and corners of the tiles, so it can be clean and tidy with the external corner line.

3. If no measures are taken, there will be gaps or right angles on the opposite corners, which are unsightly, so installing external corner lines can beautify them.

4. Rich colors, which can be matched with the colors of corners and floor tiles to form rich colors.

5, high safety, the arc eases the right angle to reduce the damage caused by collision, and can protect the corners from being bumped. Material of external corner line: PVC series ceramic tile external corner line, aluminum alloy series external corner line and stainless steel series external corner line. Although the popularity of stainless steel corner line is not high compared with PVC corner line and aluminum alloy corner line, its advantages are still very obvious. Because of the material, it has strong corrosion resistance and can effectively treat low-grade weakly corrosive media such as air, water and steam. When modeling, stainless steel corner strips have two forms: sealing and opening, which can be decided according to the actual situation.