Tips on how to clean tiles

question 1: how to clean the tiles of a newly renovated house? Every newly renovated house, the tiles are quite clean, but with the passage of time, there will inevitably be some stains on the tiles, which seems to affect the aesthetics of the room. How should we clean the tiles?

1. In daily cleaning, try to use dry mop instead of wet mop. It is best to open the doors and windows immediately after cleaning, keep the air circulating, and dry the moisture on the tile wall. If it is wet weather in summer, you can use a dry cloth to wipe it again, and then turn on the air conditioner to dehumidify.

2. For general stain cleaning, you can use household cleaning agents such as detergent or decontamination agents. If it is vitrified brick, you can directly wipe it with dry cloth or water.

3. In addition, there are some colloidal or solid stains. It is not suitable to use hard brush cleaning tools such as shovels and steel brushes for forced cleaning. Instead, we should choose appropriate cleaners according to the specific properties of the stains. The following are some common methods to deal with stains:

(1) Use bleach for stains such as tea stains, fruit stains, coffee, soy sauce vinegar, leather shoes prints, etc. When using, soak them for 2-3 minutes and then wipe them with cloth. Some stains that have penetrated into bricks for a long time will take several hours.

(2) For mildew spots formed by mildew of ink and antifouling wax, bleach should be used. When using, just apply bleach to the stain and soak it for a few minutes to wipe it off;

(3) Use hydrochloric acid or phosphoric acid solution for cement, scale, water and stains, and rub it several times.

(4) Use alkaline cleaner or organic solvent (pentanone and triethylene) for paint, greasy marker and surface antifouling wax layer, and remove paint and grease remover;

(5) rubber hammer printing for decontamination: soak it in 2%-4% sodium hydroxide solution for 24 hours and then wipe it with a cloth, then soak it in 3%-5% hydrochloric acid solution for 3 minutes and then wipe it with a cloth.

(6) Use alkaline cleaner for ice cream and acidic cleaner for lime scale.

In addition, it should be noted that acid-base cleaning agents may corrode the surface of ceramic tiles, so they should not be used frequently, and more cleaning agents with neutral pH value should be used. At the same time, when using decontamination agents, gloves should be worn to remove stains, and then the tile surface should be scrubbed clean with clear water, and dried immediately without leaving water stains.

Question 2: Tips for cleaning ceramic tiles. Tips for cleaning household ceramic tiles

Cleaning ceramic tiles in specific places-Bathroom

After a long time, there will be a lot of dirt on the whole bathroom glass, walls and floor tiles, which makes it difficult to clean them. The easiest way is to go to the supermarket and buy a multifunctional foam cleaner for Mr. Wittmann's bathroom. Just wipe it with a spray-drying cloth, and it will be easy to clean the stains on the bathroom tile surface. If you want to save money, the simplest way is to clean the tiles by using the alkali at home and dissolving it in hot water, and the effect is also good.

There is dirt in the joints of ceramic tiles in the bathroom. You can spray some bathroom cleaner on the dirt, wait for a while, brush lightly with a brush and rinse with clean water at the same time. If there is still residual dirt, switch to bleach for laundry and do as mentioned above. If you want to wash the bathroom tiles white and shiny, you can add a little ammonia water to the soapy water.

tile cleaning in specific places-kitchen

If you use high-concentration professional cleaning agents to clean tiles, it will certainly save labor, but it will also do some damage to tiles, and it will be easier to get dirty in the future, just like cleaning sanitary ware with acidic detergents, which will damage the surface of tiles.

Daily maintenance should always be cleaned with general detergent, and don't wait until the oil stain is too thick, which will be very tiring. Go to the mall to buy a bottle of super concentrated cleaner, first spread it evenly on the mimeographed surface, and then wipe it dry after 5 minutes. Then wash it with clear water, and toothpaste will have the same effect.

to clean the tiles around the kitchen stove, you can spray it with kitchen oil cleaning solution and wipe it off with a rag. Mix paraffin wax and white vinegar in equal amounts, put them in a bottle and shake them before use. Using this solution to wipe tiles has a good cleaning effect.

question 3: how to clean the dirt on the tiles? Cleaning method of pollution of glazed tiles: For glazed tiles, the glaze layer on the tile surface is a very dense substance, and colored liquid or dirty things will not penetrate into the brick body. This kind of pollution on the tile surface can be removed by using a rag to dip in water or adding some detergent to wipe the tile surface. If there is a lot of dust squeezed in the concave-convex gap of the tile, brush it with a brush and then rinse it with clear water.

method for cleaning the dirt of vitrified brick:

For vitrified brick, the following corresponding cleaning agents can be used to clean the pollutants commonly used in families: _

1) Pollution type: daily cleaning method: mop can be used, and then detergent and soapy water can be used to clean it.

2) Pollution types: tea, ice cream, grease and beer

Cleaning method: soda solution can be used for cleaning.

pollution type: sediment, rust and mortar

cleaning method: use sulfuric acid or hydrochloric acid solution. Drop it on the brick surface, let it stand for a few minutes, then wipe it, and protect your hands when injecting water into the sea. Amway has a special ceramic tile cleaner, and the effect is quite good! If lime, putty powder and white latex drop on the brick surface, use a blade to scrape it off carefully.

4) Pollution type: paint and drawing pen

Cleaning method: turpentine and acetone can be used to wipe, and toothpaste used at home also has a good decontamination effect. Pollution types: soy sauce, vinegar, carbon powder < P > Cleaning method: The effect of using toilet cleaner is better.

pollution type: ink

cleaning method: you can use Amway tile cleaner or toothpaste to remove it.

suggestion: if the surface of vitrified brick is polluted, it is better to use corresponding cleaning agent to clean it immediately!

note: common household cleaners: toilet cleaner, detergent, toothpaste, Amway Touli ceramic tile cleaner, Qianyixi brand ceramic brush and Qianyixi brand ceramic decontamination king (with good decontamination effect on stubborn stains).

question 4: what method is used to clean the tiles? Tips for tile cleaning. What method is used to clean tiles?

when the house was newly renovated, it was very clean and beautiful, but after living for a long time, there was little time to take care of the room, but the tiles and wall tiles became a little "dirty" and it was very difficult to clean. I believe many people have such pain. So how to keep the tiles clean for a long time? Here are some clean tips to share with you.

methods/steps

1. tiles need to be cleaned frequently

in fact, tiles need to be cleaned frequently, just with soap, detergent, etc. Generally speaking, tiles are best cleaned once a week, just like some good ones can be cleaned again for a long time.

2, 2. Wash it in time if it is accidentally dirty

Tiles are easier to clean, but when they are accidentally dirty, the dirty things will react chemically after landing, which will eventually lead to the inability to clean the tiles in the future, leading to irreversible damage. Once it is dirty, it must be cleaned at the first time.

3, 3. Regular maintenance

Waxing ceramic tiles regularly can increase the waterproof and antifouling properties of ceramic tiles. Make the tiles at home brighter. Generally speaking, tiles only need to be waxed once a quarter to ensure that tiles are as bright as new. 4. 4. What should I do if there are small scratches on the tile?

What should I do if the tile is scratched by a hard object? Apply toothpaste to the small scratches, and then wipe them with a cloth. The ingredients in the toothpaste can replace the main ingredients in the tile and play a role in repairing the scratches on the tile. In particular, Nuopin tiles can be repaired with a little. 5. maintenance of tile joints

tile joints also need to be maintained to prevent mold propagation from damaging the whole tile. Remove surface stains with decontamination paste, and then brush with waterproof agent to avoid moisture. Without water, mold is not easy to reproduce, and the purpose of continuous mildew prevention can be achieved. Ceramic tiles should also be maintained at ordinary times, so that the service life will be longer.

question 5: how can I clean the tiles in the bathroom? Oil stains can be cleaned with detergents such as detergent. Scale can be washed with acid cleaning agents such as white vinegar and dilute hydrochloric acid. It is not recommended to use sandpaper, steel wire balls, etc., because if the surface of ceramic tile becomes rough, it will be easier to scale. If stains are difficult to remove, you can use a brush, but don't use a steel wire brush. If it is other dirt, use scouring powder or decontamination powder. Use toothpaste for small areas. Never use 84 and other highly corrosive liquids. It will corrode the white cement that plasters the tiles. It will be too late when you find that the cracks in the tiles are getting bigger while they are clean.

question 6: how to clean the bathroom tiles? You can rinse the soap dirt on the tiles with warm water first, so that the soap dirt can be partially dissolved, and then gently wipe it off with a brush. In addition, sulfuric acid or hydrochloric acid solution can also be used. Drop it on the brick surface, let it stand for a few minutes and then wipe it. Pay attention to protect your hands.

The rust on ceramic tiles can be removed by washing with 2% oxalic acid solution, and then cleaned with clean water. In addition, 3-4 vitamin C tablets can be ground into powder, sprinkled on the surface of ceramic tiles, and then washed with water several times to remove rust stains.

question 7: what are the cleaning methods for ceramic tiles? Thank you. The decoration of our house is inseparable from tiles. Tiles should always be kept clean, and some stains can not be cleaned well. Here I will introduce the common cleaning methods of tiles for you. 1. Ceramic tiles can be cleaned with detergent and soap. Nuopin ceramics (nuopintc) 2. Adding a little ammonia water to soap and then mixing it with turpentine to clean the tiles can make the tiles more shiny. 3, polished tiles should be waxed regularly, and the time interval is 2-3 months. 4. If there is a scratch on the brick surface, you can put toothpaste on the scratch and then wipe it with a dry cloth to repair it. 5, brick and brick gap occasionally use decontamination paste to remove dirt, and then brush a layer of waterproof agent in the gap to prevent mold growth. 6, tea, coffee, beer, ice cream, grease and other pollutants using sodium hydroxide or potassium bicarbonate solution for cleaning. 7, ink, cement and other pollutants use dilute solutions such as hydrochloric acid and nitric acid. 8, paint, paint and other pollutants use special cleaner.

question 8: how to clean the deep penetration of floor tiles? How to clean the penetration stains on floor tiles? Home coup. After understanding the structure and seepage principle of floor tiles, we should pay attention to three aspects when using antifouling materials: 1. Permeability; 2. Water resistance; 3. Strong bonding. Our company uses polymer tough materials to penetrate the brick body for the easily dirty floor tiles, so as to repair micropores, increase the density and wear resistance, and then use nano environmental protection products for crystal hard light treatment, and finally do waterproof and antifouling treatment to close the micropores to form an organic whole, so that all kinds of stains can enter without holes, thus maintaining long-term cleanliness.

how to clean the seeping stains on the floor tiles is a coup for home use. It may be that the quality of the tiles is not good. Some stains will seep into the floor tiles if they are not cleaned in time, and no matter how hard they are wiped, they will not be removed. . Depressed. Excuse me, is there any good way to remove it? After the white floor tile stains penetrate, it will be like a big face. Many people think that the stains that penetrate into the floor tile can't be cleaned. It is our technical advantage to remove the stains seeping into the tiles. The principle of cleaning the tiles seeping is to remove the stains by different tile cleaners according to the nature of the stains, so as to restore the floor tiles as clean as new, and at the same time, it will not have a negative impact on the luster and structure of the tiles. The cleaning effect is immediate, the cleaning rate is over 95%, and the surface structure of the floor tiles remains unchanged, which is our commitment to customers.

How to clean the penetrating stains on the floor tiles? It's a coup at home. China is the first company to promise a full refund if the products are not effective: the cleaning agent for welding slag black spots splashed on the ceramic tile welding slag when welding metal, so as to ensure that the black spots on the welding slag are completely removed, otherwise a full refund will be made; King of All-round Cleaning of Floor Tiles: If you use polished glazed tiles with vitrified tiles that have turned black and dirty for 3-1 years as a whole, the stained patterns can't be seen clearly, and they are basically like new tiles after cleaning. If the effect is not fully refunded; Antique brick cleaner: quickly and thoroughly clean a variety of stains in antique inferior smooth brick, and get a full refund if it is invalid; After decoration, paint stains, latex paint and color stains can be cleaned quickly and thoroughly, and a full refund will be given if they are invalid; The black and yellow printing pigment of the square wood keel left over from the interior decoration and the super water AB combination can ensure that it can be thoroughly cleaned, otherwise it will be fully refunded; Metal black scratches, black shoe prints, and Fang Gezi arc-shaped stains can be quickly and thoroughly removed by Deep Cleaning King, and a full refund is invalid; Professional repair agent for floor tiles corroded by strong acid on the surfaces of vitrified tiles and antique tiles, which will keep the tiles clean for a long time after repair, and will be refunded in full if it is invalid; Enhanced anti-pollution king for deep maintenance of vitrified tiles and polished tiles, which is as clean as new for a long time, is invalid and fully refunded; Hotel dining and bathing business floor is wet and slippery when it meets water. After the new generation of floor tile anti-slip agent is treated, the old people and children can walk easily and freely, and the effect is not good, and they will be fully refunded. Terrazzo renovation cleaning agent, seriously blackened sewage grindstone is basically as good as new after cleaning, otherwise it will be fully refunded; Exterior wall environmental protection powerful cleaner, many exterior wall cleaners are easy to corrode brick surface, this product has no damage to skin and tile, and can quickly clean tile stains.

Zhengzhou Jieliya Floor Tile Cleaning and Anti-skid Company integrates R&D, production, sales and service, and has the top ceramic tile cleaner and maintenance technology in China. Since 1999, it has been specialized in cleaning and maintaining all kinds of floor tiles, mainly serving vitrified tiles, polished tiles, antique tiles, inferior smooth brick, terrazzo, marble, etc., so as to quickly and thoroughly clean the stains inside the tiles without damaging the luster and structure of the tiles. After 11 years of professional floor tile cleaning and maintenance, the company has accumulated rich practical experience. Through continuous innovation and paying attention to practical results, the product effect is ahead of most similar products in China, and some products have also obtained national invention patents, which have successfully solved countless floor tile cleaning problems for a long time and are praised as "experts in cleaning and maintenance of porcelain floor tiles".

question 9: how to remove stains from floor tiles? how to clean floor tiles? It's easy to hide dirt on tiles at home, so how to remove stains on floor tiles? I think the best way is to use tile cleaning agent, which can be tried in a small area in advance and used in a large scale after determining the effect and dosage.

using tile cleaning agent skillfully

when paint or pigment drips on the tile, in addition to adhering to its surface, some of it penetrates into the shallow surface of the tile. Before cleaning, use a thin blade to peel off the thin layer of pollution on the surface of the floor tile, and then use the selected cleaning agent to start cleaning. If you have the same or similar cleaning experience in the past, you can directly choose and use the corresponding cleaning agent according to your experience. Otherwise, it is necessary to try to make corresponding choices and trials, but avoid abuse and misuse. However, no matter what kind of floor tile cleaner or method is used,

Daily pollution should be maintained regularly

Daily tile pollution and stains refer to some common pollution and pollution caused by people's daily life and work on the surface of floor tiles.