How to control electric curtains by smart hotel network cable? How to connect wires

Before installing the electric curtain, the power cord and control cord of the electric curtain should be reasonably distributed, so as to be more beautiful and realize the desired control mode of the electric curtain. In the process of decoration, the general power cord is wired, so it is required to arrange the power cord in front of the electric curtain. If group control, main control box or final control mode are needed, and the computer platform is connected, the control network cable should be arranged in advance.

1. From a budgetary point of view. I prefer to install it below. If necessary, you can connect other electrical appliances or plug boards, and it is not recommended to install them on them. It is not beautiful, and it also saves the budget for hydropower transformation. Objectively speaking, electric curtains are only a small part of the decoration value of your whole room. This value does not need to erect a plug-in board at a high place. In the future, if the room cover is arranged with a higher utilization rate than the wooden board, the possibility is too small.

2. The socket should be installed in an inconspicuous place. Depending on the location of the socket, there may be other appliances nearby to supply power for the electric curtains. At least 5 holes, so that if you don't like electric curtains in a few years and need to replace them, this circuit can be used for other purposes. Sometimes it can also be used as a power supply for air conditioners. Of course, in this case, a larger diameter wire should be laid.

3. Selection of socket location: It is best to hang curtains on the corner wall adjacent to that wall. The purpose of doing this is for peace. If the electric curtains block the teahouse, it is not safe.