Five Maintenance Rules of Hotel Custom Lamps

Without proper cleaning and maintenance, even the most advanced lamps will soon become dim. Regular cleaning and maintenance of lamps can keep the brightness of lamps and prolong their life. The lampshade is getting darker and darker due to dust. If not treated in time, the brightness will decrease by about 30% every year on average. Therefore, it is particularly important to clean lampshades and lamps or bulbs regularly.

Pay attention to the following five rules when maintaining.

First, when cleaning and maintaining, be careful not to change the structure of lamps and lanterns, and don't change the parts of lamps and lanterns casually. After cleaning and maintenance, the lamps should be installed as they are, without omission or misplacement.

Second, you should carefully read the signs and installation instructions of lamps and lanterns, and then install and use lamps and lanterns according to the instructions, otherwise danger may occur;

Third, when using lamps and lanterns, try not to switch them frequently, because the current passing through the filament at the moment of frequent start-up is greater than that at normal work, which makes the temperature of the filament rise sharply and accelerates sublimation, thus greatly reducing its service life, so try to reduce the switch of lamps and lanterns;

Fourth, according to the light source parameters provided by the sign, replace the aging lamp in time. If it is found that the two ends of the lamp are red, the lamp is black or shadowed, and the lamp is not bright, the lamp should be replaced in time to prevent unsafe phenomena such as ballast burning.

Fifth, lamps should be maintained in use to prolong their service life. Indoor lamps and lanterns should always be wiped with dry cloth, and attention should be paid to prevent moisture from invading, so as to avoid corrosion damage or leakage short circuit after a long time; If the lamp is nonmetallic, it can be wiped with a damp cloth to avoid dust accumulation and hinder the lighting effect.