Related knowledge of mosquito killer

Mosquito killer is a kind of mosquito-killing equipment that does not need any chemical mosquito-killing substances. It is a new generation of efficient and environmentally friendly mosquito killing equipment that absorbs advanced foreign technology and makes many technical improvements. Using the phototaxis, mobility with airflow, temperature sensitivity and gregarious behavior of mosquitoes, especially their habit of chasing carbon dioxide and seeking sex pheromones, an environmentally friendly and pollution-free efficient mosquito killing tool-black light mosquito killing was developed. There are three kinds of mosquito killers: electronic mosquito killer, adhesive mosquito killer and airflow mosquito killer. Mosquito killer has the characteristics of simple structure, low price, elegant appearance, small volume and low power consumption. Because there is no need to use any chemical mosquito killing substances, it is a relatively environmentally friendly way to kill mosquitoes.

Mosquito killer has the characteristics of simple structure, low price, elegant appearance, small volume and low power consumption.

1, exposed to wind and sun, mosquitoes can be attracted in any direction, with high killing rate and wide range.

2. The smell of carbon dioxide generated by photocatalyst is used to simulate human respiration, which has strong mosquito attracting effect, high mosquito killing efficiency, no pollution and outstanding environmental protection.

3. The pheromone released by the captured live mosquitoes induces the same kind to gather, constantly trapping and killing completely.

4. Mosquitoes are air-dried or die naturally, and there is no smell, so it is easy to trap mosquitoes continuously.

5. The biggest feature is that it is equipped with an anti-mosquito escape device (anti-escape shutter), which will automatically close when power is cut off. Mosquitoes go in, and they can't get out anymore. They naturally dehydrate and die.

product classification

There are many kinds of mosquito killers on the market, except for the size of electricity and the number of ultraviolet fluorescent lamps.

In addition, other differences are mainly in appearance. Usually, it is mainly classified by power and tube number, and it is a common and typical electronic mosquito killer. According to the power classification, there are many specifications in the mosquito killer, such as 2, 3, 4, 5, 8, 10, 15, 20W and so on. Most of them use 2~8W mosquito killers, and the corresponding room area is about 10~20 square meters. According to the number of ultraviolet lamps, they can usually be divided into single tube and double tube, and there are also products with more than two tubes, but they are rare in the market. Most families use single-tube mosquito killers; Double-tube mosquito killer is suitable for restaurants, hotels, offices and family living rooms. The electric power of the double-tube mosquito killer is above 6W.

Some mosquito killers are also equipped with mosquito suction fans. When mosquitoes approach the mosquito killer, they will be sucked into the mosquito killer by airflow, thus improving the mosquito killing effect to a certain extent. But the price of this kind of mosquito killer is usually much more expensive than ordinary mosquito killer. Only suitable for users with high requirements or special needs (such as mobile mosquitoes, etc.). ). It is rarely used by ordinary families, so far it has little social ownership.

The basic structure of mosquito killer is composed of ultraviolet cathode fluorescent lamp, high voltage power grid, printed circuit board (mainly including voltage doubling rectifier circuit) and enclosure plastic shell. Among them, the ultraviolet cathode fluorescent lamp is in the center of the inner side of the plastic shell, and the periphery is surrounded by a high-voltage power grid, so that when mosquitoes fly to the ultraviolet cathode fluorescent lamp due to phototaxis, they will be killed by the high-voltage power grid on the way, thus achieving the purpose of killing mosquitoes.

Electric shock type

The electric shock mosquito killer comprises a lamp tube, a high-voltage electric shock net and a seat frame, and is characterized in that the seat frame consists of a top plate, a bottom plate and two side plates, two ends of the lamp tube are respectively installed on the two side plates, and the high-voltage electric shock net is installed on the front, upper and lower surfaces of the lamp tube; a mosquito storage box is arranged on the bottom plate of the seat frame, which is located below the high-voltage electric shock net, and the front and rear surfaces of the seat frame are respectively provided with mosquito storage boxes. The lower end of the front protective net is bent to form a wing net, which is matched with the rear protective net to cover the lower part of the high-voltage electric shock net. There is a gap between the wing net and the bottom plate, which can not only collect electric shock mosquitoes, but also prevent personal injury caused by careless use, and is safe to use.

The electronic mosquito killer is made by using the principle that mosquitoes have strong phototaxis and thermotropism, and the light source emitted by ultraviolet fluorescent lamp lures mosquitoes into the mosquito killer and is electrocuted by high-voltage power grid. The DC high voltage on the high-voltage power grid is usually 800~ 1500V, and the short-circuit current is less than 1mA, which is not dangerous to normal people. At the same time, the ultraviolet light emitted by the mosquito killer can be used as soft light illumination at night, and the general household mosquito killer consumes 2 ~ 8 W of electricity; Therefore, the mosquito killer is a small household appliance with small size, convenient use, low power consumption, non-toxic and tasteless, and no need for a mosquito killer.

There are various types of electronic mosquito killers, and the big ones are generally used in hotels and restaurants. Generally speaking, 12W electronic mosquito killer can control12m2, and 12W mosquito killer can control 25m2, but both are limited to one room. Airflow mosquito killer can't be hung, but electronic mosquito killer can be hung. If placed in a place where mosquitoes often appear, the effect will be better.

Sticky trap type

I. Product introduction

Sticky insect killing lamp subverts the high-voltage current inverter structure of traditional electric shock insect killing lamp, and uses unique ultraviolet rays and non-toxic adhesives to attract and catch flying insects. It is an environmentally friendly mosquito and fly killing equipment, which meets the key pest control requirements of QS, HACCP, AIB, SSOP, GMP and other safety management systems.

Second, the product features:

1. Sound, odor, gas and insect carcasses will not be scattered around the insect trap lamp.

It can kill mosquitoes, flies, moths and other insects.

3. The appearance is simple and smooth, and the purple light is upward, which is well matched with the theme decoration background of the installation environment and plays an embellishment role.

Third, product advantages:

The unique choice of ABS+ flame retardant material makes the control of flies and other flying insects easier and more environmentally friendly.

The unique design is very beautiful and more decorative, surpassing similar products on the market.

3. The maintenance is simple and quick, and it is very convenient to replace the sticky paper.

Energy-saving inductive ballast has the unique advantage of voltage protection function.

They are all made of high-quality special optical frequency control, which has special attraction to flies, mosquitoes and other flying insects.

6. The adhesive board products used with the fly-killing lamp have the advantage of keeping sticky for a long time.

Fourth, the scope of adaptation:

This product is widely used in the production and processing places of various foods and food-related products, such as bakeries, slaughterhouses and processing rooms. It can also be used in airports, schools, hotels, hospitals, restaurants, canteens and other public health places that require high sanitary conditions, and can also be used in production and processing places such as electronics, precision instruments, chemicals, printing and packaging.

Airflow pattern

Product introduction:

The air flow mosquito killer is similar in appearance to a common electric fan, but smaller in size, with built-in lamp tubes and electric heating wires. As long as the power supply is turned on, the airflow mosquito killer mainly kills mosquitoes according to the principle of wind mechanics, without any auxiliary conditions and chemicals, and the generated airflow makes the indoor air fresh.

Product principle:

Mosquito suction machine automatically attracts mosquitoes to the power grid to kill mosquitoes according to the principle of wind mechanics. No open flame and electroacoustic. Purify the original function of circulating air and enhance records.

Memories, refresh.

Product features:

High mosquito killing rate, long service life, energy saving, no pollution, no toxicity, wide application range, safety and reliability, and convenient use.

Scope of application:

This product is suitable for families, restaurants, hotels, hotels, field work, farms and so on.

Photocatalytic mosquito

Mosquito killer (figure 1 1)

Photocatalytic mosquito trap is the only mosquito killing device that adopts the comprehensive technology of light, smell and wind, and it is the most advanced and environmentally friendly product in the world at present. After years of research, international mosquito experts have found that mosquitoes find people by the smell of carbon dioxide emitted by the human body. When they feel the airflow of carbon dioxide, they will immediately fly into the airflow. Moreover, they also have phototaxis, and the wind is weak. What attracts them is ultraviolet light. Photocatalytic mosquito killer attracts mosquitoes by using their favorite ultraviolet rays, emitting light at 360 degrees, which can attract mosquitoes and flies in any direction and has a slight temperature effect; Through the photocatalytic reaction of ultraviolet light and photocatalyst, carbon dioxide and airflow are released. The wet smell of carbon dioxide emitted by human body is used to lure mosquitoes to fly, and the fan stirs the surrounding air at high speed to form a vortex, so that mosquitoes who are used to flying with the airflow come with the wind. Once the mosquito is sucked into the insect trap window, it is absolutely difficult to escape the powerful vortex formed by the fan, and it will be sucked to the bottom of the insect trap window by the fan until it dries to death.

Photocatalytic mosquito trap is the most environmentally friendly and efficient mosquito trap. The wavelength of mosquito trap lamp is 360-380 nm, which is harmless to human body. Trace carbon dioxide and water come from photocatalysis, which is equivalent to human breath and does not contain any toxic chemical components; Photocatalytic reaction can also purify the air, effectively kill all kinds of bacteria in the air and absorb all kinds of toxic and harmful gases. It has the same killing effect on flies and moths, and its overall performance is better than other mosquito killing products. Its biggest feature is that it can continuously kill female blood-sucking mosquitoes in the same space, thus effectively interrupting the breeding cycle of mosquitoes in this space and its surrounding areas, and achieving the effect of killing mosquitoes and flies in groups.

Photocatalytic mosquito catcher uses the vortex formed by fan to dehydrate mosquitoes and dry them to death. There is no "snapping" sound of the electric mosquito trap, and there is no accident caused by high voltage electricity, which is safer and more reliable. Can be widely used in homes, hotels, restaurants, student dormitories, hospitals, cafes, bars, theaters, offices, canteens, kitchens, farms, food processing plants, factories, outdoor and other indoor and outdoor places.