How to maintain the ground stone in hotel lobby

In order to keep the floor clean and bright after stone maintenance for a long time, a dustproof and waterproof carpet should be laid at the entrance of the hotel lobby, which can not only isolate dust and sewage from entering the lobby, but also increase the standardization and elegance of the lobby. In addition, the dust and sewage brought by customers into the lobby are cleaned up in time by electrostatic dust pusher and rag every shift every day to achieve a more perfect cleaning effect. The concrete measures are: thoroughly cleaning the floor-hard polishing-pushing dust-cleaning-.

After the stone surface is crystallized, the surface crystal will lose its luster in daily use. At this time, as long as the crystal plane of the stone is maintained, the same effect as crystallization treatment can be achieved. Crystal plane maintenance is to use stone crystal powder or crystal hardener to form a clear, dense and hard protective layer on the stone surface through physical and chemical reactions under the dual effects of high temperature generated by special crystallization equipment and friction between horse hair pad or steel velvet and stone. This technology can make stone more colorful and prolong its service life. Its outstanding features are strong construction elasticity, high gloss and high hardness, which simplifies the daily care work, keeps the stone in use and prolongs its service life.

Maintenance conditions of stone crystallization:

1, stone crystallization treatment is based on no deep scratches and no serious pollution.

2. The stone must be dry.

3, stone crystallization maintenance must have a certain gloss.

Matters needing attention in stone maintenance:

In order to keep the stone breathing smoothly, it is necessary to avoid covering the stone surface with carpets and sundries for a long time. Otherwise, the water under the stone can't evaporate through the pores of the stone. Then the stone will have annoying stone pathological problems because of too much water and increased water content. If you must lay carpets and pile up sundries, please don't forget to change them frequently and keep them thoroughly clean.

Neither hard granite (hardness HRS88-114-7) nor soft marble (hardness HRS 46-77 3-5) can withstand the long-term ravages of sand and soil particles.

Therefore, dust remover and electrostatic mop should be used from time to time for thorough dust removal and cleaning.

It is best to put a partition pad at the entrance of commercial space to filter the sand carried by shoes. It is best to put on slippers after entering the house to reduce the chance of sand and dust wearing the stone surface.

Regular maintenance, gloss protection, dust removal and cleaning can't keep the bright luster of stone. Therefore, we must regularly ask professional companies to send people to do maintenance and gloss regeneration.

For example, the surface of marble is recrystallized with crystallization solution, or the surface of marble or granite is regenerated with polishing powder, or the surface of marble or granite is regenerated with polishing powder, or a breathable gloss protector is used. , can make the stone as new forever.

Clean up the pollution immediately.

All stone materials have natural pores and pollution sources (oil, tea, coffee, cola, soy sauce, ink, etc. ) it is easy to penetrate into the stone along the pores and form annoying stains. Therefore, it is necessary to choose a special protective agent for stone with good quality to prevent the pollution of stone by pollution sources. You should know that all protective agents can't completely stop pollution for a long time, so once a pollution source falls on the stone, it must be cleaned up immediately to prevent it from infiltrating into the hair of Baibai.

Always keep it ventilated and dry.

Stones are afraid of high humidity. Water vapor will hydrate, hydrolyze and carbonate stone, resulting in water spots, whitening, weathering, erosion, rust yellow and other diseases, which will cause damage to stone. Therefore, the stone installation outlet should be kept ventilated and dry.