How to remove wallpaper from glass

1. Wet the rag and put it away.

2. Put on gloves, put a wet rag on the sticker, fully wet the sticker, and then wipe it slowly.

3. After wiping the wet rag, replace it with a cleaning cloth to wipe the imprint left on the sticker, and at the same time spray water on the cleaning cloth with a watering can.

5. After cleaning the indentation with a cleaning cloth, carefully wipe the whole glass with a wet rag to remove the residual paper scraps.

6. When there is still water on the glass after removing the scraps of paper, slowly absorb the water with a dry paper towel, and then wipe it with a newspaper. In this way, the glass will be as clean and transparent as before labeling.

Extended data:

How to use glass stickers:

1. Wipe the dust off the glass with a wet towel (not too dry) first.

2. Sprinkle this water evenly on the glass (it would be better to water the flowers with a watering can).

3. Take the cut cellophane out of the paper mold, sprinkle it with some water and stick it gently. If there is anything inappropriate, you can flatten it with your palm or lift it up and start over. Don't touch it for two or three days until it dries naturally.

Note: water must be used around the window, so that it will not stick quickly. If it doesn't fit, it's easy to expose it. If there are bubbles, be sure to squeeze them out.

Baidu encyclopedia-glass sticker