How to clean the elevator

1. Clean the inner wall of the car

Dip the rag into the bucket prepared with detergent, pick it up and wring it out, and wipe it hard from top to bottom along the inner wall of the car. If there is stubborn dirt or stain on the wall, you can scrape it lightly with a shovel or spray the detergent directly and then wipe it back and forth with a rag. After soaking the water with another rag, wring it out and wipe it. After cleaning the rag, wring it out and wipe it thoroughly.

2. Clean the car door slot and the car floor

Pick up the sundries in the car door slot with an iron hook, or use a dust collector to clean the sand in the car door slot. If the car floor is covered with a carpet that is changed every day, just lift the old carpet and mop the car floor with a semi-dry mop.

after the moisture evaporates, put a clean carpet on it. If the floor of the car is a fixed carpet, you can use a vacuum cleaner to clean the sand and sundries on the floor, and then use a floor washer (carpet washer) with cleaning agent once a week.

3. Clean the elevator car door

Generally, the elevator car door is made of stainless steel. When cleaning, spray a little stainless steel spray first, and then wipe it with cotton soft cloth from top to bottom to make the elevator car door clean and bright.

after cleaning, you should look around the whole elevator car and check whether there are any omissions and incomplete cleaning. If there are any, you should make up immediately, and finally inform the elevator operator to restart the elevator.

Extended information:

Attention

Mechanical parts:

1. The traction machine of the elevator needs oil lubrication. There are two scales on the outer cover of the traction machine. Open the oil nozzle to check that the oil should be between the two scales. If the oil is lower than the lower scale, it means that the traction machine should be refueled.

if you don't refuel, the elevator will not be well lubricated for a long time, which will lead to the burning of the elevator traction machine and motor. After the elevator runs for a long time, the oil should be changed in time to keep the traction machine fresh and well lubricated.

2. Cleaning and lubrication of elevator car guide shoes. As we all know, the guide shoe runs on the guide rail, and there is an oil cup on the guide shoe. In order to make the elevator not produce friction sound during operation, it is necessary to refuel the oil cup and clean the guide shoe regularly, and clean the health of the car.

3. Maintenance of elevator hall doors and car doors. Elevator failures usually occur in elevator hall doors and car doors, so attention should be paid to the maintenance of hall doors and car doors. First, refuel at the refueling place on the upper sill of the door and keep it well lubricated, so that the elevator will not make unpleasant sounds during operation and the opening of the door.

Pay attention to the inspection of the switch wire of the elevator safety touch panel or light curtain touch panel, because the high frequency of elevator door opening and closing will damage the switch wire, which requires the maintenance personnel to check it every time, and replace it in advance, so as not to make users doubt the quality of elevator products because of the door problem.

Baidu Encyclopedia-Elevator Maintenance

People's Network-Elevator Maintenance