What are the hazards of water leakage in pipeline wells?

Water leakage in the pipeline well-Analysis of the causes of water leakage in the pipeline well: The kitchen, bathroom and bathroom cause the indoor pipeline well to seep to the next floor, which is mostly manifested as peeling, peeling, brittle cracking or even peeling of the paint layer of the pipeline well (generally the local wall of the kitchen, bathroom and bathroom). At the same time, the domestic sewage generated by leakage directly affects the sanitary environment of the lower users. The main reason is that the pipeline wells in the kitchen, bathroom and bathroom upstairs are mostly brick structures, and there are two different materials at the joint between the bottom of the well and the ground. When the waterproof fortification is insufficient or no waterproof treatment is done at all, the domestic water in the upper kitchen, toilet and bathroom seeps into the shaft and flows downstream, and then seeps out from the lower shaft wall, resulting in peeling, crispness and even peeling of the paint layer on the lower shaft wall. Water leakage in the pipeline well-the solution to the water leakage in the pipeline well is to remove the structural surface along the decorative layer of the wall around the pipeline well in the upper part of the kitchen and bathroom at a place about 300mm high and 300mm wide on the ground, and clean up the base surface. Polymer cement is used for grouting and blocking the intersection of pipeline wall and floor.