What if the toilet flush valve button doesn't work?

It is a common problem that the button of toilet flush valve does not work properly, which may be caused by button damage, water valve failure or insufficient water pressure. If you encounter a situation where the toilet flush valve button doesn't work, here are some solutions.

1. Check the button: first check whether the button is stuck or damaged. If this is the case, try pushing the button up by hand. If the water can be flushed smoothly, the key is damaged and needs to be replaced.

2. Check the water valve: If the button is not damaged, the problem may appear on the water valve. You can open the lid of the water tank and check whether the water valve is normal. If it is because of the water valve failure, you can try to adjust the position of the water valve or replace the broken parts.

3. Check the water pressure: Another reason that may cause the toilet flush valve button to be ineffective is insufficient water pressure. You can check whether the water pressure at home is normal. If the water pressure is insufficient, it may be because the pump is broken or the water pipe is blocked. You can find a professional repairman to deal with this problem.

4. Cleaning the toilet: If the above methods can't solve the problem, you can try to clean the toilet, probably because the toilet is blocked and the flushing valve can't work normally. You can use toilet cleaner to clean the toilet.

In short, it is a common problem that the toilet flush valve button is not working, but it is not complicated to solve. You can choose the corresponding treatment method according to the specific situation. If you are not sure about the treatment method, you'd better find a professional maintenance worker to help you solve it.