What should I use to clean crystal lamps to make them brighter?

What should be used to clean crystal lamps to make them brighter?

What should be used to clean crystal lamps to make them brighter? Crystal lamps have always been very popular with people. There are many styles of crystal lamps and good decorative effects, but crystal Lamp installation is troublesome and requires a lot of parts, so you generally need to find a professional installer to install it. What should I use to clean the following crystal lamps to make them brighter? What should I use to clean the crystal lamp to make it brighter 1

1. You can use a towel dipped in glass water to wipe the crystal lamp, so that the dust can be wiped away. 2. If there is oil stain on the crystal lamp, use hot vinegar to clean it, so that the oil stain can be wiped clean quickly. 3. If you want to make the crystal lamp brighter, wipe it with white vinegar. Mix white vinegar and water evenly in a ratio of 1:3, then soak it with a towel and twist it until it is semi-dry, and then wipe the surface of the crystal lamp. , the crystal lamp will be very translucent after wiping.

What precautions should be taken when cleaning the crystal lamp?

1. When cleaning the crystal lamp, we must wipe it carefully and do not wipe the small accessories and some decorations next to the crystal lamp. The product was damaged.

2. Before cleaning, lay thick carpets or old clothes on the ground. Because when wiping the crystal lamp, it is easy to break. If the crystal lamp falls on the floor, it will break into pieces. It will be very troublesome to clean it at this time, and it will also prick your hands. If we take good measures on the ground, even if the crystal lamp falls and breaks, it will be easy to take care of it.

3. When wiping the crystal lamp, be sure to wear gloves so as not to leave stains and fingerprints on the crystal lamp. And when wiping, you can also better check whether the crystal lamp has been wiped clean.

4. However, when wiping the lamp stand, be sure to wipe it clean with a lint-free rag. If there is hair loss, the overall aesthetics will be affected to a certain extent. Moreover, the water absorption of the rag must be strong, otherwise the water stains left on the crystal lamp will cause the crystal lamp to get damp and cause rust. What should I use to clean crystal lamps to make them brighter? 2

Quick tips for cleaning crystal lamps

1. Special cleaners

The surface of crystal lamps cannot be cleaned with ordinary cleaning methods Cleaning agents, such as using clean water, not only cannot completely clean the stains on the surface of the crystal ball, but also affect the brightness of the crystal, because the brightness of the crystal lamp comes from its crystal clear material. If incorrect cleaning agents are used, Cleaning, this will cause damage to the surface of the crystal lamp, which will affect the brightness of the crystal light, so you must choose a suitable cleaning agent for cleaning the crystal lamp.

There is already a special cleaning agent for crystal lamps on the market. It is very convenient to use. You only need to spray it on the surface, and then the dust and dirt on it will be evaporated by the cleaning agent. be taken away, and then wipe the surface of the crystal lamp clean with a wet rag, so that cleaning is simple and convenient.

2. Kerosene

Kerosene can be used to clean crystal lamps. Use an old toothbrush dipped in kerosene to scrub the crystal lamp. The stubborn dirt on the surface of the crystal lamp will be cleaned quickly. If you can dismantle the crystals one by one and soak them in kerosene, the effect will be better. After washing with kerosene, scrub it with washing powder and water, and then clean it with clean water.

3. Vinegar and water

Add an appropriate amount of water to the white vinegar, then soak the hot towel in it, twist it until it is semi-dry, and then wipe it gently The surface of the crystal lamp can be easily cleaned.

4. Micro-particle jet degaussing and quick-drying cleaning method

This cleaning method is relatively professional. It is generally used for professional crystal lamp cleaning equipment and is equipped with imported cleaning ingredients. The lamps are cleaned and degaussed. No disassembly is required during the whole process, and the cleaning speed is very fast. It will look like new after washing dishes.

What should I use to clean crystal lamps to make them brighter?

1. First, prepare the necessary tools, equipment, cleaning agents, etc. If it is a large chandelier, you also need to prepare mechanical tools such as high-temperature steam spray guns, as well as professional operators. Otherwise, the crystal lamp may be damaged.

2. Spray the professional crystal lamp cleaner evenly on the surface of the crystal, making sure to spray it on every surface of the crystal. Then wait for about 5 minutes, and then the detergent can fully penetrate into the bottom layer of surface stains, so that the stains and grease can be dissolved and peeled off.

3. Then clean the crystal surface with clean water. If the crystal area is large, it can be wiped with a damp cloth. The crystal area is small and there are many crystal beads, so it is best to put clean water in a micro-mist cleaner and spray the water into mist with high pressure to rinse.

4. After cleaning, wait for the crystal lamp to dry and then reconnect the power supply before use. Large crystal lamps can be dried with a hair dryer to speed up drying. Precautions for cleaning crystal lamps: When cleaning crystal beads, if the crystal beads used before are of a lower grade, friends who have the conditions should replace them with higher-grade crystal beads. The higher the grade of the product, the better the surface dust-proof treatment, and it is less susceptible to damage by oil fumes. It can remain crystal clear even after being used for a long time. If it cannot be replaced, then the cleaning cycle of the crystal lamp must be shortened. What should I use to clean crystal lamps to make them brighter 3

1. Crystal lamp installation steps

1. Inspection

There are many parts of crystal lamps, including back strips, bulbs, When installing lamp panels, etc., first check whether the parts are complete and whether there are any defects; in addition, prepare installation tools, such as electric drills, screwdrivers, wrenches, etc.

2. Fix the back strip

The crystal lamp back strip is used to fix the lamp. When installing, you can first use the back strip to determine the installation position on the ceiling, and then drill holes with an electric drill. Use expansion screws to fix the back strip on the top surface, then use screws to fix the lamp panel on the back strip, and use screw caps to hold the entire lamp so that the main part of the crystal lamp is fixed.

3. Connect the wires

Connect the crystal lamp wires to the wires reserved on the ceiling. For safety, disconnect the power supply at home when connecting the wires. switch to avoid the risk of electric shock. In addition, the neutral wire and live wire must be connected correctly and fixed with insulating tape.

4. Install the light bulbs

Fix the light bulbs on the lamp panel and keep the power off. After fixing all the light bulbs, test them to ensure that all the light bulbs can be used normally. , if a problem occurs, check the cause in time until it can be used normally.

5. Install accessories

Crystal lamp accessories are quite diverse. These accessories can be connected in series according to the drawings. As for how many strings of hanging decorations need to be hung and how to match the length, the drawings have instructions. Just follow the instructions on the drawing for installation.

2. How to clean the crystal lamp

1. Prepare ladders, rags, detergents and other tools, and then turn off the power. In order to prevent the ladder from falling If the floor is scratched, you can place a sponge pad under the crystal lamp.

2. Climb up the ladder, take down the crystal balls one by one, and put them in the basin for cleaning. Remember the position when taking out the crystal balls for easy installation.

3. After placing the crystal ball in the basin, you can use detergent to clean it and remove the stains on the surface.

4. After cleaning the crystal ball, wipe the electroplated light frame clean with a rag, and then reinstall it.