Traditional Culture Encyclopedia - Hotel franchise - How to install sliding doors What aspects should I pay attention to when installing sliding doors?

How to install sliding doors What aspects should I pay attention to when installing sliding doors?

method of erection

Install and fix the upper rail, hang three points at both ends and midpoint of the upper rail with a gravity cone (hanging wire hammer), and draw with an oil painting on the ground. The lower rail is fixed at these three points, which can ensure that the upper and lower rails are completely parallel and the whole is on the same plane, so that the push and pull of the sliding door is in the best state.

Matters needing attention

1. The size of the track box at the upper part of the sliding door should be 12 cm high and 9 cm wide. Like the curtain box, the track box is equipped with a track, and the sliding door can be hung on the track. When the height of the door is lower than 1.95m, the feeling is very depressing. Therefore, when making sliding doors, the height should be at least 195+ 12=207cm.

2. The gold size of a normal door is about 80 cm× 200 cm. Under this structure, the door is relatively stable and beautiful, so the width-height ratio of the sliding door is close to the gold size.

3. Carefully use the sliding door from the floor to the top (open the hanging rail box). Because the swing amplitude is too large when pushing and pulling, the sliding door is easy to deform after a long time, and the deformed back door cannot be opened, which means that it cannot be maintained and used.

4. If you want to control the noise and reduce the noise interference to the living room, you should choose the rail with better quality when choosing the rail, so as to ensure the convenience of the rail-hanging sliding door and reduce the noise during the use of the rail-hanging sliding door.

5. For sliding doors with double doors, the widths of the two doors should be the same, so as to ensure the installation effect and quality of the double doors. In the installation process, the door cracks on both sides should be adjusted and aligned to avoid disharmony of the sliding door with rail.

6. If the front and rear space is relatively narrow, it is not suitable to install the rail-hanging sliding door.