What does the electronic patrol system do and how effective is it?

Electronic patrol system 1. For routine security inspections of general security (buildings, communities, hotels, villas, schools, factories, supermarkets, parks), a built-in different security system is installed on each different floor of the shopping mall and at important locations. With the coded information button, security inspection personnel hold the reader to conduct inspections according to the predetermined time and route. At the same time, they use the reader to touch the information button installed on the line. The reader will record the location and time of arrival. Managers can transfer the recorded information in the reader to the computer, and the inspector's inspection location and arrival time can be clearly displayed on the screen. According to the predetermined inspection shift and time requirements, the computer software will automatically count On-time, late and missed inspection reports are displayed on the computer screen and can be printed through a printer, providing managers with important management information. Since the security personnel must arrive at the inspection location at the designated time to read the information button and obtain the record, and the information button cannot be copied, it is impossible for the inspection personnel to be lazy or cheat. Managers can evaluate inspectors based on inspection reports and give corresponding commendations or rewards and punishments. This will help improve the initiative of inspectors and improve the scientific nature of management, so as to promptly discover safety hazards and reduce safety risks. purpose of the accident. The shopping mall safety intelligent inspection management system can also be used in different occasions such as product warehouse inspections, transportation line time management, important equipment inspections, and even employee attendance checks on and off work. The cost-effectiveness of investment can also be improved by using one machine for multiple purposes. 2. Fire and explosion prevention (oil fields, oil depots, natural gas, coal mines, grain depots, forestry) Examples The safety maintenance of mines has become increasingly important, and any delay in the discovery of any fault will bring huge losses. However, the current mine inspection and inspection management methods cannot easily ensure that the inspection work is completed on schedule with quality and quantity (such as whether inspections are missed or inspections are not carried out according to the prescribed time). Therefore, it is necessary to introduce new means to improve. The "inspection management system" is exactly what is needed, providing modern management means and maximizing the use of existing human and material resources. Install it on the inspection route of mining personnel or in key locations (such as mine tunnel leakage, exhaust system, etc.), and install an information button every other section. It can be installed on stone pillars and wooden piles and is not easily damaged or lost. Mining workers carry information collectors and click the information button with the collector to record when and where the workers arrived. After the mining personnel conduct the safety inspection, they bring their inspection equipment back to the computer center. Under the dedicated inspection software system, the list will be automatically analyzed to reflect the work of the security inspection personnel, and the mine will be analyzed based on the records of the security inspection personnel. Gain a deeper understanding of the situation, perform timely maintenance on equipment, eliminate hidden dangers, and establish an operational mechanism for safe production. 3. Road traffic (roads, railways, airports) In order to strengthen road administration, investigate and deal with all kinds of illegal activities that encroach, use, occupy, and excavate roads and road facilities in accordance with the law, protect road properties and road rights from infringement, and ensure that roads are intact and To ensure safety and smooth traffic, in principle, road administration personnel should patrol the roads no less than 2/3 of the time each month. Inspection personnel should record the inspection status in a timely and detailed manner. The 204 National Road Administration Inspection System was put into trial operation. The system is mainly composed of computer terminals, information buttons, patrol detectors and software systems. Each information button has a unique corresponding code and is installed on different road sections. The patrol personnel inspect the section and connect the patrol detector with the information After the button is docked, the time and other information are automatically recorded. The information collected in the inspection device can be input into the computer to form an electronic inspection database. The characteristic of this system is that the inspection time and points are predetermined, and inspectors cannot add or delete them on their own. It can accurately and timely check the inspection status of road administration personnel through computer networking technology, thus modernizing the supervision and management of road inspection work. , scientific track. 4. Inspection of lines and pipelines (telecommunications, power lines, water supply, heating, oil, and natural gas pipelines) such as mobile base station equipment. Install an information button with different codes on each base station site, and the base station inspector After arriving at the location with the reader and checking the base station facilities, touch the information button and the reader will record the arrival location and time. Managers can transfer the recorded information in the reader to the computer, and the inspector's inspection location and arrival time can be clearly displayed on the screen. According to the predetermined inspection shift and time requirements, the computer software will automatically count The on-time, delayed and missed inspection reports are displayed on the computer screen and can be printed through a printer, providing managers with important management information.

The mobile communication intelligent inspection management system can also be used in different occasions such as equipment inspection in the computer room, inspection management of line operators, and even employee attendance at get off work. The cost-effectiveness of investment can also be improved by using one machine for multiple purposes. Telecom application areas: a. Inspection of telecom call lines b. Inspection of telecom computer rooms, switches, and important communication facilities c. Inspection of telecom public telephone booths and card-type public telephone equipment. 5. Military and police patrols (public security, border defense, prisons, banks) are different from traditional security patrols. The patrol routes, time, frequency, and density are all unreasonable. The patrol personnel cannot distinguish the priorities and cannot find the key points. They only rely on experience When conducting patrols, the police force is repeatedly wasted, often achieving half the result with twice the result; in addition, some patrol personnel have a weak sense of responsibility and have the mentality of being passive and slacking off, not doing their best, and "being a monk for a day and beating the clock for a day", which leads to a great deal of blindness in patrol work. sex and passivity. The "electronic patrol" system can effectively supervise and manage patrols. It can accurately record the patrol time, frequency and routes of patrol personnel. It has the characteristics of flexible wiring, simple operation and strong pertinence. It is useful for supervising, standardizing and improving public security agencies. The security patrol work is of great reference value. At the same time, the "electronic patrol" system can rely on computer information networks to achieve full sharing of resources. It has strong vitality and broad development space. It is a favorable carrier for public security organs to strengthen patrol prevention work in the new era. 6. Industry applications (hospital/nurse duty rounds, postal and telecommunications/letter delivery, bus/scheduling) For example, an information button with different numbers is installed on each bus, and the dispatchers at each site each hold an information button. When the bus departs or arrives at a certain stop, the dispatcher uses the patrol detector to touch the information button installed on the bus. The patrol detector has a memory function and will automatically record the arrival date of the bus at the stop. At the exact time, when returning to work, the dispatcher hands the reader to the manager. The manager uses the communication cradle to connect to the microcomputer and transmits the data information in the patrol reader to the microcomputer. The bus status can be clearly displayed on the screen. Based on the actual working conditions of each site, the printer can be used to generate various reports and monthly reports at any time as needed. Provide important management information to decision makers. Scheduled and fixed-point management of postal letter pick-up and delivery, postal trains, postal savings vehicles, and mail transportation; this system helps to overcome loose management of postmen and postal workers, delays, and missed posts, allowing managers to easily implement Management responsibilities, and help scientifically assess the labor performance of staff, eliminate hidden dangers, prevent them before they occur, and effectively improve the quality of communication and the safety of postal operations. After using this system, business leaders can simulate work on the computer screen, set work routes and times, and print work charts. When employees are working, they do not have to check the work status of employees from time to time. By using this system, they can know the status of each employee on the job. Personnel inspected what location at what time, thus achieving precise quantitative management of postal delivery work.