What is the normal water temperature in Ford (what is the high water temperature in Ford Mondeo)

The reason for the high water temperature in Ford may be that the cooling fluid is not changed for a long time or the cooling fluid is insufficient, resulting in poor heat dissipation. In addition, there may be problems with the water pump or thermostat of the engine, resulting in high water temperature.

The full name of coolant is antifreeze coolant. As the name implies, it is an antifreeze coolant, which not only can prevent freezing, but also has the functions of cooling, corrosion prevention and scale prevention. Generally speaking, the coolant is added every two years or about 40,000 kilometers, which is only a reference period. If it is an operating vehicle, such as a taxi, a network car, etc. Vehicles are frequently used and have a lot of mileage, so the filling cycle of coolant is short. Generally, there is a water level scale on the cooling kettle. It is best to add automobile coolant between the highest water level and the lowest water level scale. In normal car maintenance, the remaining amount of coolant should be checked regularly. If it is found that the coolant is less than the minimum scale, it should be replenished in time, otherwise it will affect the cooling effect of the engine. Attention should be paid when filling coolant. Different brands and models of coolant cannot be mixed, and the formula components are different. Chemical reactions may occur during the mixing process, which will affect the effect of the coolant.

According to the temperature of cooling water, the automobile thermostat automatically adjusts the amount of water entering the radiator and changes the circulation range of water, thus adjusting the cooling capacity of the cooling system and ensuring the engine to work in a suitable range. If the car thermostat is broken, the most obvious symptoms will be displayed on the water thermometer. If the main valve of thermostat is opened too late or too early, the engine will overheat. If the engine is started too early, the engine warm-up time will be prolonged and the engine temperature will be too low, which will affect the efficiency. In short, if the engine water temperature is too high or too low, then the thermostat may be faulty. If the thermostat is broken, the car can't continue to run, so it should be repaired and replaced at the 4S shop immediately.