Installation method and matters needing attention of floor lamp box

There are no lights now, so we can't walk in the street or at home. It has become a part of our life and is closely related to us. We often see many floor-standing light boxes on the roadside of the street, with pictures and posters on them, which can be used for publicity and lighting. Floor-standing light boxes are very common. Everyone just saw the finished product it had installed. Do you know how to install them? Let's share the floor-standing light box.

Installation method:

1. According to the position of accessories, 2.5×2.5 angle steel is generally used for blanking and welding triangular brackets. Horizontal light boxes are generally 20 cm away from the wall, and the arm length remains unchanged. The height of the boom is half the length of the boom, and diagonal braces account for 1/3 of it. ? If the light box 1.8× 1.2m is 20 cm away from the wall, two solid angle irons shall be welded. Fix the rear side of the big light box to prevent it from swinging. The height is at least 2/3 of the height of the light box.

2. If the light box is erected, it will be 1.3×60×20, and the column can be raised not less than 2/3 of the light box. ? Installation of light box, 1.8× 1.2×20, must be welded into a half-frame light box. The upper and lower parts are firmly fixed. ? There is also a small light box, the size of which is less than 1.20×0.60×0.2, which is directly connected with the aluminum strip on the aluminum gusset plate. ? When installing the angle iron frame, drill four holes with the diameter of 10 on the bracket, and then put the bracket in the position where it needs to be installed. Determine the position of the hole and drill a hole with a diameter of 8 with an impact drill. Fix the expansion screw, and then fix the bracket? Put the nut on the eyelet, tighten it, and finally fix the light box firmly with large wooden screws. ? Check whether it is safe again. ? The overall appearance of light box production depends not only on the square, oblique and angular seams, but also on the skew and arrangement of fonts. Be sure to check the words several times before pasting them. If there is someone nearby, let others check it several times. Whether there is an error.

Precautions:

1. This painting should be strong and durable. First of all, the picture of the rolling advertising light box must be durable, because if the picture in the rolling advertising light box is easy to deform, Suqian Xingke Advertising Equipment Co., Ltd. is a manufacturer specializing in the production of bus shelters, bus stops, newspaper reading columns, signboards, advertising trash cans, rolling picture-changing light boxes and other products!

2. The picture color quality should be high. The color quality of the picture in the rolling advertising light box should be high, so as to ensure that the color of the picture is not easy to fade and can remain aerobic.

The installation method and precautions have been told to you, and I believe you already know that the installation of floor-to-ceiling light boxes is still very strict. Construction personnel must carefully install, don't make any mistakes. After all, the landing light box is to be installed in public places, and everyone can see it. If there is any fault that affects personal safety, it will be bad. In life, we should keep a cautious and serious attitude towards everything. Only in this way should we be cautious and serious.