Rotating door installation

Revolving door is a common door type in public places such as shopping malls, hotels and hospitals. It is characterized by elegant appearance, automatic opening and closing, and no space occupation. However, the installation of revolving doors requires technology and experience, otherwise it will affect the use effect and safety. The following are the precautions and precautions for the installation of revolving doors.

I. Matters needing attention

1. The installation of revolving doors must be carried out by professionals, and unauthorized disassembly and modification are not allowed.

2. Before installation, the size, weight, material and power supply of the revolving door must be checked and confirmed.

3. Before installation, the floor, wall and ceiling must be checked and confirmed to ensure that they can bear the weight and strength of the revolving door.

4. Before installation, the power cord must be checked and confirmed to ensure compliance with safety specifications and standards.

5. Before installation, you must check and confirm the operating environment of the revolving door, such as temperature, humidity, light, etc.

6. Before installation, users of revolving doors, such as the elderly, children and the disabled, must be evaluated and confirmed.

7. After the revolving door is installed, it must be tested and debugged to ensure normal operation and safe use.

Second, matters needing attention

1. The installation of revolving doors must comply with safety specifications and standards, such as GB/T7 106-2008 revolving doors.

2. The installation of revolving doors must comply with electrical safety specifications and standards, such as GB 5226.1-2011Low-voltage Electrical Apparatus and Its Control Equipment, etc.

3. The installation of revolving doors must comply with fire protection codes and standards, such as GB500 16-20 14 Code for Fire Protection Design of Buildings, etc.

4. The installation of revolving doors must conform to the safety codes and standards of building structures, such as GB50009-20 12 Code for Design of Building Structures.

5. The installation of revolving doors must conform to environmental protection norms and standards, such as GB3096-2008 "Environmental Quality Standard for Urban Road Traffic Noise Pollution".

6. The installation of revolving doors must conform to the principles and norms of ergonomics, such as GB/T 15 173-2008 "General Terms of Ergonomics".

7. The installation of revolving doors must comply with operating procedures and maintenance procedures, such as "Operation and Maintenance Manual of Revolving Doors".

Third, the operation steps

1. Prepare tools and materials, such as screwdrivers, wrenches, electric drills, expansion screws, expansion pipes, etc.

2. Clean up the installation site, such as removing dust, sundries and garbage.

3. Measure the installation location and size, such as floor, wall and ceiling.

4. Install the door shaft and door leaf, such as adjusting the height of the door shaft and installing door leaf screws.

5. Install the power cord and controller, such as connecting the power cord and debugging the controller.

6. Install safety devices and protective facilities, such as infrared sensors and anti-collision strips.

7. Test and debug the revolving door, such as checking the running track of the door leaf and the sensitivity of the sensor.

8. Acceptance and delivery of revolving doors, such as filling in installation acceptance records and delivery manuals.