Traditional Culture Encyclopedia - Hotel franchise - How to design the kitchen console?

How to design the kitchen console?

1, the best height of kitchen console:

Cooking is so tiring, mostly because the height of the console is not done well. After repeated scientific experiments, it is concluded that the height of the kitchen console is generally 85~90cm, which is exactly the height that the hostess's arm with a height of 1.6 meters naturally lifts.

2. Double washing basin:

If possible, there must be two sinks at home, one large and one small, which can be used to wash dishes and vegetables. At the same time, there should be a rotatable faucet that can serve two pots.

3, sink glass cutting board:

The big sink can be covered with a high-strength glass chopping board, and the ingredients can be sliced directly on the chopping board after being washed in the small sink, which is very convenient. In extreme cases, put a stainless steel drain board under the glass cutting board, and the washed pots and bowls can be dried in it without occupying any land.

4. Pull-out faucet:

360 clean faucet without dead angle is an essential artifact in the kitchen. A good faucet must be flexible and can be taken anywhere or pulled. Generally, it is best to dial 15mm, and you can do whatever you want to do.

5. Height of hanging cabinet:

After talking about the countertop, let's talk about the height of the cabinet. According to the storey height of flat-floor houses in China, it is best to pull the hanging cabinets above the ground 1.6 meters. If it is less than 1.5 m, it will not only affect the kitchen operation space, but also make the kitchen look cramped and depressed.

6. Socket with switch:

In kitchen operations, hands are often wet. In order to avoid danger, it is best to install a reserved socket with a switch. The socket should be designed at 80㎝ from the edge of the sink, which is a tried and tested golden distance, which can not only avoid splashing water, but also reserve enough space for the preparation area.

Precautions for kitchen waterproofing

1, don't destroy the original waterproof layer. Many owners will transform the kitchen pattern and water supply and drainage pipes when carrying out hydropower transformation, so they must emphasize to the decoration workers not to destroy the original waterproof layer during construction. If you have to destroy the original waterproof layer, you must repair it in time, or even redo the waterproof project to ensure that there will be no leakage.

2. Choose a suitable waterproof material. Generally, the waterproof materials commonly used in home improvement are one-component environmentally-friendly polyurethane coatings, mainly because this coating can closely wrap the pipeline and the ground, penetrate into the cracks, and will not shrink after drying. Compared with rigid materials such as waterproof cement, it is more suitable for small-area houses with many bathroom pipes and cracks, and the price is more reasonable.

The above is what Bian Xiao shared for you about how to design a kitchen console. More information can focus on the construction industry and share more dry goods.