Installation method and steps of roman blinds.

Roman blinds is a new type of decoration, which can be divided into folding, fan-shaped and wavy according to its shape. Roman blinds can create a warmer effect, and is often used for decoration of high-end entertainment and leisure places such as homes and hotels, and is deeply loved by many owners. Next, I will show you the installation methods and steps of roman blinds.

Replacement tool

Tools required for roman blinds installation: tape measure, impact drill, small ladder, power supply connecting wire, 4CM cross screw, plastic tube expanding with 4CM cross screw, cross screwdriver and hammer.

Installation steps 1

Roman blinds installation method 1: firstly, punch a hole in the wall with an impact electric drill, and draw the bearing positioning line and hole line with the installed bearing as the standard line. Generally, there are three stents in Rome with a length of more than 2.5 meters. The middle support is located in the center of the window or wall, and both ends must be equidistant. The support at both ends is about 15-20 cm away from the wall.

Installation step 2

Installation method of roman blinds 2: The drilling depth is 3.5-5 cm, and it is not allowed to slide or skew when drilling. Caution: Keep away from wires and water pipes. After drilling, press the plastic expansion tube into the hole.

Installation step 3

Roman blinds installation 3: the mounting rod bracket is self-tapping and fastened, and the lifting ring is inserted into the rod, and the lifting ring is divided into two parts, with 1 lifting ring at both ends; Press Rome into the open bracket and adjust it so that the decorative heads at both ends are at the same distance from the wall.

Installation step 4

Installation method of roman blinds 4: hang the curtain, put on the hook, and hang the other end of the hook into the hole of the lifting ring; Open and close the curtains left and right, and check whether the sliding is flexible and whether the two curtains are equal in height. When the height is inconsistent, fine-tune it in time.