Where should the combustible gas alarm in the hotel kitchen be installed?

The combustible gas alarm in the hotel kitchen should be installed where employees can easily see and hear it. According to the density of the gas to be measured, the installation position of the indoor probe should be different. When the measured gas density is less than the air density, the probe should be installed 30cm away from the roof with the downward direction; On the contrary, the probe should be installed 30cm above the ground, with the direction upward.

It should be noted that there should be no strong electromagnetic field around the alarm, and the probe of the alarm mainly contacts the detection element of the combustion gas sensor, so be careful when installing to avoid breaking the probe.

Extended data:

Combustible gas alarm devices can be divided into industrial combustible gas alarm devices and household combustible gas alarm devices according to the use environment, and can be divided into fixed combustible gas alarm devices and portable combustible gas alarm devices according to their own forms. Widely used in petroleum, chemical, pharmaceutical, steel, special industrial plants and other places where flammable gases exist.

The detector converts the gas concentration detected by the sensor into an electrical signal, which is transmitted to the controller through the cable. The higher the gas concentration, the stronger the electrical signal. When the gas concentration reaches or exceeds the alarm point set by the alarm controller, the alarm sends out an alarm signal and can start external devices such as solenoid valves and exhaust fans to automatically eliminate hidden dangers.

Baidu encyclopedia-combustible gas alarm