What if the shower head is blocked?

People often take a bath, and the long-used shower head will be blocked, which will not only bring a lot of inconvenience to everyone, but also affect people's mood. But don't worry, let's share with you some good ways to do if the shower head is blocked, and how to do it, and teach you some skills to buy shower heads.

1. What should I do if the shower nozzle is blocked?

1, vinegar bubble

Shower blockage is mostly caused by scale blocking the water outlet after long-term use. If it is only slightly blocked, just disassemble the cleaning nozzle. If the shower head is blocked for a long time, and a large number of small holes are blocked, it is suggested that some white vinegar can be prepared, so it is appropriate to pour the vinegar into the basin, so that the shower head can be submerged. After soaking in vinegar for ten minutes, the scale in the shower head can be removed.

Step 2 use acupuncture

If your sprinkler is only partially blocked, you can drain the water first to see which holes are blocked. Then use a needle to break the blocked small hole until no impurities flow out of the hole. But pay attention to the strength of puncture.

Step 3 use lubricants

Each family's nozzle material is different, and the solution is different. If the shower nozzle is blocked by metal rust, Bian Xiao suggests using rust removal lubricant. This rust-removing lubricant can make the metal have better permeability. You can separate the rusty layer from the metal layer, leaving a protective film so that the shower will never rust.

Second, the shower selection skills

1. First of all, it depends on its coating: in a humid environment such as a bathroom, the appearance of the shower will affect its own material if it is not electroplated. But electroplating is the same, but the process is very different. Therefore, in the case of sufficient light, the surface of the shower faucet should be dark as a mirror, without any oxidation spots and scorch marks.

2. There is also a look at its tube body: good tubes are all copper, and the appearance should be polished, polished, nickel plated, chrome plated, etc. To ensure that it will not turn black and blister when used in humid environment. Then many merchants will use cast iron pipes as copper pipes. Moreover, the knocking sound of the cast iron pipe body is depressed and stuffy.

3. Look at the valve core: A good valve core is made of ceramics with extremely high hardness, which is smooth and wear-resistant to prevent leakage. We must try the switch ourselves. If you feel bad, don't buy this shower. The qualified valve core can be opened and closed for 500,000 times. If the defective valve core does not reach this strength, it is easy to leak water.

4. Double-handle shower faucet is also a handle connected with cold water and hot water respectively. For example, the left hand is hot water and the right hand is cold water. After the rotating device controls the water output, it is necessary to adjust the water temperature in coordination with each other.

5. Single-handle shower faucet means that we use a single handle to adjust the respective water output of cold and hot water by rotating left and right, and cooperate with each other to adjust the water temperature, which is more convenient to operate, but everyone needs to pay attention to avoid burns. Especially when there are old people and children at home, you should be especially careful.

Through the understanding of the content of the article, friends don't have to worry about what to do if the shower head is blocked. Bian Xiao shared with you the purchasing skills on how to solve this problem and how to do it.