How to make frameless three-dimensional resin relief painting

We choose sulfuric acid paper with good transparency and color permeability as drawing paper. First of all, you should draw a good sketch, and you should always downplay it when sketching. It is not advisable to write too much for the convenience of revision. After the general outline of the whole work is determined, a deep drawing process is needed. Deep drawing is mainly to deepen the handwriting of the work and the details of each scene. The use of lines should be smooth, and the layering of the picture should be expressed by lines. To copy the map, first stick a layer of sandblasting protective film on the board. The sandblasting protective film has no glue on one side and glue on the other, and it is attached to the embossed working face, which is beneficial to the next work. When pasting, you must paste it flat. In order to stick it flat, you can wipe it back and forth on the protective film with a white towel, and then cut the protective film into the same size as the relief. Then spread a layer of carbon paper on the protective film and put the manuscript pattern on the carbon paper, and you can copy the map. Before this work, we should consider whether our work is a deep sculpture or a relief. Relief is deeply painted with the front of the manuscript, while deep carving is carried out with the back of the manuscript. Only in this way, the pattern we sandblasted is the required artistic effect. Draw a rough draft on the rough draft with a brush, so that the rough draft will be copied to the protective film. Next, it's finalized. A cliche is carved with a blade along the lines of a deeply drawn pattern. When it is rigid, only the protective film will be engraved, and only slight scratches will be produced on the relief. Stiffness is for the smooth progress of sandblasting in the next step. Sand blasting shall be carried out in rigid mode. Old-fashioned

The knife marks will be cleaned up, and the hard methods of deep carving and relief are the same. At first, you must be careful, apply force evenly, cut one line at a time, and try to avoid carving one line repeatedly and off-line. Where the lines are dense, the details that need to be cut off must be cut off to avoid connection. After the finalization, you can enter the sandblasting workshop.

Frameless three-dimensional resin relief painting is a popular fashion decorative painting in recent years. This product integrates sculpture, relief and handicraft, and the screen is made of resin as the main raw material and combined with original handicrafts. The biggest characteristics of the product: bright colors, soft lines and strong three-dimensional sense bring you a unique visual impact, which has become an indispensable decorative art in modern home life.

Baby positioning: the unique artistic expression and rich pictures of this product meet the display needs of home, hotel, restaurant, office and other occasions. Show your dignity and artistic taste.

Baby craft: embossed resin decorative painting "handmade, no mechanized production." All products need to complete dozens of different processes, and their unique technology shows their unique artistic value.

Baby material: resin and natural agate powder are synthesized (note: resin is close to the physical texture, will not cause fading, fission and other phenomena, and has the advantages of rich colors and diverse patterns, which is deeply loved and recognized by consumers). The bottom plate is a high-density plate sprayed with environmental protection paint.

Infant care:

1, just like cleaning dust at home, wipe it regularly with a semi-dry towel or lightly sweep the dust with a feather duster;

2. Precautions: Avoid sharp scratches, gasoline scrubbing, high-temperature wiping and corrosive solvents.