Safety work self-assessment report

Safety work self-assessment report

Safety work self-assessment report is used in more and more situations in life. In many cases, all the information mentioned in the report must be Be accurate. Therefore, after the inspection work is completed, a report must be written. The following introduces the safety work self-assessment report. Safety work self-assessment report 1

1. Raise awareness and strengthen leadership

Our bureau quickly held a meeting A May Day tourism production safety work arrangement meeting was held, and a safety production inspection working group was established, with Director Huang Juhong as the team leader, Huang Yan as the deputy team leader, and other cadres as members, and a large-scale inspection action plan was formulated. At the same time, all scenic spots, travel agencies, and star-rated hotels are required to strengthen safety awareness, strengthen safety work leadership during holidays, do a good job in holiday tourism safety work, further improve work plans and emergency plans, and strengthen Safety awareness, service awareness, quality awareness, and all safety measures are in place.

2. In-depth inspection to ensure safety

Scenic spots are required to focus on repairing safety protection facilities such as walking trails and setting up safety warning signs in dangerous areas, so as to eliminate various tourism safety hazards in a timely manner ; Check whether the travel agency has issued travel safety instructions before organizing a group trip, formulate a careful itinerary plan, rent a company and passenger vehicle with travel operation qualifications, good reputation, and strength, and must hold a vehicle technical condition safety inspection certificate and sign a In the vehicle rental contract, it is strictly forbidden to exceed the number of passengers, drive fatigue vehicles over time, and other behaviors that endanger the safe transportation of tourists, and ensure that everyone in the tour team wears their seat belts correctly when the vehicle is in motion.

Ensure the safety of travel and transportation during the festival, proactively guide tourists to purchase personal accident insurance, and enhance their ability to withstand risks; star-rated hotels are crowded places, and the focus is on checking whether the fire safety facilities and equipment in hotels and staff dormitories are intact. , whether the layout is reasonable, whether the fire escapes are smooth, and whether the fire prevention plan is feasible to ensure the safety of tourists, employees and public facilities.

3. Establish and improve the safety hazard investigation ledger in the tourism industry

Our bureau has always attached great importance to the sound ledger work. At the beginning of the year, we signed the " "Chunqiu Travel Agency Tourism System Safety Production Goal Responsibility Letter" and urged our county's scenic spots to improve the scenic spot security system.

During this safety inspection, key scenic spots, star-rated hotels, and travel agencies were inspected. Regarding the problems discovered during the inspection, our bureau has a zero-tolerance attitude towards hidden dangers and problems and will pay close attention to them. Implementation, supervise and guide all tourist attractions, travel agencies, and star-rated hotels to do various tourism safety work, and issue safety production hazard supervision and rectification letters to problematic objects respectively, requiring that the problems discovered during the inspection be ensured that rectification is in place.

4. Be on duty conscientiously and maintain smooth communication

Strengthen the duty system during holidays, arrange a 24-hour duty system, adhere to leadership leadership, cadres on duty, and maintain smooth communication 24 hours a day. Strictly implement the systems for leading cadres to lead shifts, 24-hour duty for key positions, and accident information reporting systems. Safety work self-assessment report 2

According to the requirements of the spirit of the document "Notice on Carrying out Safety Production Inspections" issued by the head office, on June 21, our branch held a meeting of all employees of the branch. The manager Hui Jianwu presided over, actively launched a discussion on production safety, studied relevant countermeasures, and carefully deployed the safety production inspection activities, focusing on heatstroke prevention and cooling and summer safety hazards; from June 22 to 25, the engineering department Chief Zhang Jiachao led the team to conduct a comprehensive and careful inspection of the construction site, identify hidden dangers, and required on-site personnel on duty to supervise the implementation of safety measures as required; on June 26, Zhang Jiachao, chief of the Engineering Section, presided over a regular engineering meeting to conduct a regular meeting of the construction site. Report on potential safety hazards and put forward rectification requirements within a time limit.

Through this activity, our company found that there are two main problems at the construction site:

1. The construction team has a weak safety awareness of heatstroke prevention and cooling;

2 , heatstroke prevention and cooling measures are not in place;

In response to the above existing problems, our branch has strengthened the implementation of measures, urged relevant responsible units to rectify on time, reviewed on schedule, tracked rectification, and ensured rectification in place.

The following corrective measures have been formulated:

1. Strengthen leadership. All construction units are required to strengthen measures and conscientiously implement the safety production responsibility system. The main responsible persons shall actively supervise the implementation, focus on increasing the inspection of heatstroke prevention and cooling work, conscientiously implement the rectification measures, clarify responsibilities, and make rectifications within a time limit, and adhere to the principle of "fixed time, fixed time, and fixed time." According to the principle of "responsibility, definite measures, definite personnel", the responsibility system for safety production work is implemented at all levels, and it is practical and detailed.

2. Increase the intensity of investigation. All construction units are required to make inspections of production safety regular, institutionalized, and standardized; on-site personnel on duty must frequently inquire, supervise, and inspect frequently. During the inspection, we diligently discover and correct, resolutely nip hidden dangers in the bud, and prevent and reduce the occurrence of safety production accidents.

3. Develop practical measures to prevent heat stroke and cool down. All construction units are required to establish and improve safety production work rules and regulations, and truly have rules and regulations to follow; construction units are required to make appropriate adjustments to working hours; and regularly distribute herbal tea and other heat-reducing foods. For workers with high temperatures reaching 35°C, measures such as shift changes and rest should be taken; work safety in production and heatstroke prevention and cooling should be effectively carried out.

Safety production is a systematic project that requires unremitting efforts. Through this inspection and self-examination activity, our branch found some problems and made effective rectifications; in the future work, we will pay close attention to the cultivation of employees' safety awareness, moral cultivation, sense of responsibility and work skills, so that Employees always keep safety first and sound the alarm to prevent any safety accidents from happening. Safety Work Self-Assessment Report 3

Since I started working as a "full-time safety officer", I have always taken "being a qualified safety officer" as my current job goal. Since shouldering this important task, I have always kept a clear head, treated my work diligently and down-to-earth, and throughout the year, I have strictly followed the safety work goals set at the beginning of the year and fully implemented the "safety first" ", prevention first, comprehensive management" safety policy, strengthen safety production management. With the trust and support of the relevant leaders of xx, I cherish this safety role very much and devote myself to the work with a positive attitude. I feel very fulfilled in my work over the past year. The personal work situation over the past year is now summarized as follows:

1. Main work content in 20xx

1. Assist department leaders to comply with the company’s requirements and the company’s current actual situation, combined with the company’s The current status of production safety, establish and improve the company's production safety management system. The formulation of these systems not only meets the inspection requirements of superior departments, but also facilitates the company's safety management work.

2. Under the correct leadership of the leader in charge of safety work, carefully supervise the safety functions of the equipment and personnel in the production operation area, and prevent any mistakes in the planning, layout, inspection, summary, and assessment of safety production work. Operators who habitually violate regulations must resolutely punish other safety violations so that they can grasp major hidden dangers and weak links that threaten safe production.

3. Assist department leaders to conscientiously implement the safety production responsibility system, regularly participate in workshops before and after work to strengthen the publicity and communication of relevant safety production laws and regulations, accident cases, and conduct solid safety training work, resolutely fulfill the "Work Safety Responsibility Letter" to ensure the smooth realization of the company's safety production goals.

4. Earnestly carry out various tasks of the "Safety Production Month". In the annual national "Safety Production Month" activity, employees were organized to conduct a safety oath of 100 people and a safety month launching ceremony, and put up safety propaganda slogans to promote the importance of safe production, enhance employees' awareness of safe production, and truly make it a reality. Its transformation from "want me to be safe" to "I want to be safe".

5. Actively carry out hidden danger investigation work, and ensure that safety work is well understood. Organize more than x regular safety and civilized production inspections and various special safety inspections every month to find out unsafe behaviors of employees and unsafe conditions of equipment from the work site, educate employees on-site, and ensure timely rectification of hidden dangers. Various unsafe factors were nipped in the bud. This year, more than 100 hidden dangers and problems were discovered, and all were rectified. Listen carefully and collect rational safety suggestions and opinions from the team and report to superior leaders.

6. In accordance with the spirit of the company’s notice, we conscientiously carried out the four prevention work in summer, formulated and implemented detailed flood control, fire emergency plans and fire emergency plan drills, and actively organized xx employees to participate in the drills. During the drills Identify deficiencies and ensure that losses are minimized in the event of an unexpected event.

7. Provide safety education to company employees. In particular, safety education is given to new workers and foreign construction workers. Through safety education, they can have a preliminary understanding of the safety profile of xx and the identification and prevention of hazards in their work. They can establish a sense of safety self-protection in future jobs and reduce The probability of production safety accidents.

2. Shortcomings in work

Although I have achieved certain results in my position over the past year, there are also many shortcomings, mainly reflected in The following aspects;

1. Safety management is not strict and detailed, employees have indifferent safety awareness, and there are blind spots in safety management. An accident involving a vehicle in the xx limestone freight yard caused a death.

2. There are still some deficiencies in organizational and communication skills, and there is still a certain gap with experienced colleagues; business learning should be strengthened, the mind should be emancipated, and the gap should be filled.

3. The supervision and inspection of external cooperation units is not enough. In particular, some special operations personnel work without certificates, and the phenomenon of "three violations" is quite prominent. In this regard, we should strengthen the supervision of outsourcing units, eliminate the phenomenon of working without a certificate, strengthen education and increase penalties for those who violate regulations.

4. Not bold enough in work and not forward-thinking enough. We should change our working methods and methods through continuous learning, and constantly innovate and improve.

3. Work plan for the next year

1. Strengthen business learning, strive to improve one's own quality and work ability, and complete various tasks with due diligence and responsibility. Be diligent with your eyes, mouth, hands, and legs, actively adapt to various environments, hone your will in complex work, and improve your own quality.

2. Be a good assistant to the leadership, make timely and reasonable suggestions on various problems that arise in safety work, and cooperate with department leaders to complete various tasks assigned by the company.

3. Strengthen safety supervision and inspection at work sites, especially for high-risk operations such as large-scale hoisting, high-altitude operations, and cross-cutting operations, to ensure operational safety. Violations and hidden dangers at the work site must be promptly stopped and rectified.

4. Conscientiously implement the production safety responsibility system, various rules, regulations and operating procedures, regularly participate in pre- and post-shift meetings of each unit, and conscientiously implement regulations on production safety education and training for workers, safety technical briefings, etc. .

5. Strengthen the review of the qualifications of outsourcing units, safety production licenses, and special operation personnel operating certificates, strengthen the review of various special construction plans, and effectively carry out hazardous maintenance work Conduct regular safety inspections and inspections to identify potential safety hazards, promptly require the construction unit to make rectifications and supervise them in place, and conscientiously perform safety supervision responsibilities.

In short, over the past year, my safety management work in the company is still far from the leadership's requirements. I will continue to sum up experience, strengthen learning, update concepts, and improve my ability to work in all aspects. Focusing closely on the company's safety management work, with a highly responsible attitude towards work and career, we will do all our work in a down-to-earth and conscientious manner.