What are the installation steps of hotel door locks?

Aichida provides the installation method of hotel door locks:

Step 1: Buy a door lock. First, order the door lock from the manufacturer, and open the door according to the opening diagram provided by the hotel intelligent door lock factory.

Step 2: Install the door lock. To correctly install the door lock on the door lock, the door lock is usually set to the normally open state, which means that it can be opened inside and outside, and can only be controlled after touching the card, so don't think that there is something wrong with the door lock just because it can be opened inside and outside the hotel smart lock.

Step 3: The sign that the door lock is installed correctly is that the engineering card can be unlocked. Engineering cards are generally cards in card issuing machines. The debugged card can't be opened just like the key before decoration.

Step 4: Prepare the door lock for debugging. Debug the door lock after it is installed correctly. What you need at this time is the on-site networking of the card issuing machine computer. With these conditions, our company will tell you how to debug after installing the software remotely for you.

Step 5: After debugging, there is one card that needs to be emphasized, that is, there is no need for an authorization card. Just use it directly after issuing the card and opening the door.

Ps: Attached below is the installation drawing of hotel door lock ~