Monthly work summary of engineering department

Monthly work summary of engineering department: 6 articles.

Summary is a written material for reviewing, checking and evaluating a certain stage of study or work afterwards. It enables us to find mistakes and correct them in time. Let's sum it up. How to write a summary is correct? The following is my monthly work summary of the engineering department, hoping to help you.

Monthly Work Summary of the Engineering Department 1 After reporting to the company in May, I was assigned to work in the Engineering Department, mainly responsible for asset management of various project departments of the company and handling miscellaneous affairs of departments. I know this is a preliminary test given to me by the company. I know that the key to success is to start with small things, so I take every small thing seriously in my daily work and take it seriously wholeheartedly. I still remember that on May 14, the first job given to me by the department was to go to Tuanjie Reservoir to measure and draw the completed map. Because the site construction is unfamiliar with the site, I have encountered many difficulties, so I can only learn from the site construction personnel, and only spend more time measuring, analyzing and comparing the original construction drawings. It took me a few days to complete this task, and the completion of this work became an example of many similar works later. As long as you are willing to study hard, there is nothing you can't finish. Later, many as-built drawings, such as Chanba 1, West High-tech 5, 18, Zhang Lamu of the World Expo, sentry box, Guodian and other projects, were well reviewed, revised and plotted, all thanks to the first training.

After the management of the company's fixed assets was handed over to me, many problems were found through inspection, and some standardized management was published in newspapers many times. Almost every issue of the newspaper has a document notice issued by the project, and each project department has been inspected three times on average this year, which is also what I personally think is very unsatisfactory this year. One is due to the time and traffic conditions, and the other is the uncertain timing. For example, the fixed assets of Weihe Sheng Xing Park are relatively small, so we must pay enough attention to it, which is also needed for next year's work.

After entering June, the settlement of Yangling Arboretum Project was started, and the lifting of drawings was completed. Because of the particularity of Yangling Arboretum project, the visa has been changed a lot, and there are also many changes on site, especially more than 200 kinds of seedlings and flowers in the greening part, so this task is one of the most difficult tasks. After field measurement and careful analysis of construction drawings, it took a lot of time and energy, and finally achieved ideal results with the cooperation of colleagues Qi Xin.

Just put down the settlement work of Yangling Arboretum, at this time, the company received the design work of Weihe 36 Bid Section, and the boring and heavy work of earthwork calculation of 36 Bid Section construction drawing was also given to me at this time, which is also the first complete and responsible major work this year. During this period, almost all employees in the company worked overtime to do this work, which was a moment to test the team spirit. After a reasonable division of labor and the cooperation of the whole company, during this period, we should constantly guide you to learn the algorithm principle, popularize the knowledge of CAD software operation, check the calculation process, calculate and provide the original basic data, and finally summarize nearly100000 digital data, etc ... It took more than two weeks to complete, and finally the joy of success was the most unforgettable this year. The hard work of working overtime without vacation for half a month was not in vain, nor was the summer heat in July. Facts have proved that hard work will definitely pay off.

I haven't fully recovered from the significant earthwork calculation just now. With the full implementation of the 20xx Expo project, the focus of work has shifted to the Expo project. At this time, the problems before me are the purchase volume and processing specifications of nearly 100 kinds of materials, and the technical specifications of more than 100 kinds of complex processes such as stone, anticorrosive wood, steel, green seedlings and flowers. The statistical verification of this work falls to the engineering department. On the one hand, it is necessary to provide a basis for the procurement work of the material department, on the other hand, it is necessary to carefully analyze and review the drawings, control the material cost, and check the bill of quantities when bidding. I am very grateful to the company for trusting me to complete such an important work, and I am also very happy to participate in the construction of the world horticultural project. More than 200 drawings, more than 300 pages of lists have been turned over, dozens of pages of calculation data manuscripts have been counted, and the final summary table has been revised ... Once problems are found in inspection and audit, they will be re-analyzed, supplemented and refined, only to provide the most accurate quantitative basis for the material department and reduce unnecessary losses and waste for the company. This work also provides the accumulated first-hand original data for the later evaluation work, and also lays a solid foundation for the later evaluation work. With the completion of the later evaluation work,

20xx is a hard year and an unforgettable year. After August, the company turned to the climax stage of bidding in an all-round way, assisting the business department to make bidding documents, and so on. With the comprehensive bidding, the company also found that there were many problems in the bidding construction organization design, so it clearly assigned me a new task, such as reviewing the technical content of the bidding documents and checking the list drawings. Asking and sorting out the bidding documents requires a lot of work, especially when the professional and technical strength of the tender producers is still immature. The guidance and inspection of many important bidding technical contents, such as West Hi-Tech, Weihe River, Jichang and Aerospace, are once again on me. When all my colleagues in the bidding came home from work, I was still looking through the list of drawings under the lamp. On weekends, when everyone is resting, I am still writing an outline check and revising the first draft of everyone's tender, because I know that only by fully understanding and correctly grasping the contents of the tender documents and drawings list can we guide everyone to do a good job in bidding purposefully, so I have to pay more than others, and I also know that I will get more than everyone after paying. Facts have proved that my efforts have not been in vain, and the preparations I have made at this stage are effective.

Monthly work summary of the engineering department 2 I. Actual completion of the project this month.

1, H3 Dormitory: the interior powder, exterior powder, ceramic tile, 80% roof tile, drainage installation, water supply riser, underground fire fighting and fire fighting horizontal pipe on the sixth floor are completed.

2.H4 Dormitory: 50% of floor tiles are pasted, 30% of sanitary porcelain is finished, 50% of external wall tiles are pointing, 40% of roof leveling layer is finished, 80% of drainage is completed, and 70% of water supply is completed.

3.H5 dormitory: 30% interior wall painting, 40% exterior wall brick pasting, 40% drainage, 40% water supply area 1 and 40% water supply area 2 are completed.

4. Teaching building in Area A: secondary main body of floors A 1, A3 and A5 is completed, thermal insulation layer A5 is completed, external wall plastering of floor A5 is completed 60%, secondary structures A2 and A4 are completed 60%, fire pipes A 1, A3 and A5 are installed, threading of floors A3 and A5 is completed, and A 1, A3 is completed.

5. Teaching building in Area B: the secondary structure of the first floor of B 1, B3 and B5 is completed, the roofing leveling layer of B 1, B3 and B5 is completed, the secondary structure of B2 and B4 is completed by 60%, and the threading of the second to fifth floors of B 1, B3 and B5 is completed.

6. Library: the first to fourth floors are completed, the fifth and sixth floors are completed, the roofing leveling layer is 60%, and the third staircase is 37. 9m, subject acceptance, 70% for fire riser, 80% for ventilation backwater 10% for electrical piping.

7. Art Building: The secondary structure of the 2nd, 3rd and 4th floors in the west area is completed, and the sloping roof is completed; Dongpo roofing is completed, masonry is completed by 90%, electrical piping in West Area is completed by 70%, fire-fighting buried pipe is completed, water supply and drainage buried pipe is completed, water supply and drainage and fire-fighting buried pipe in East Area is completed, and electrical completion is 10%.

8. Dining room: the plastering of the internal and external walls of the first to third floors is completed, the first floor is 90%, the fire fighting, water supply and drainage are buried, the electrical piping is 65%, and the internal rainwater pipe is 50%.

9. The main body of the first floor of the logistics service building is completed.

10, the foundation treatment of the teaching building in Area C is completed, and the foundation cushion is completed.

1 1, the foundation concrete of the teaching building in Area D is completed.

12, 80% of the foundation reinforcement binding of the academic exchange center was completed, and 50% of the formwork was completed.

13, 20% of the foundation reinforcement binding of the administrative office building was completed.

14, 50% of the steel bars on the first floor of the basketball hall are bound, and 70% of the formwork is completed. The swimming pool foundation is completed, and the first layer of steel formwork is completed by 20%.

15, 70% of the foundation reinforcement of the financial building was bound.

16, pile foundation detection of building 38 with clear water and blue sky was completed, and earthwork excavation between piles of buildings 36# and 29# was completed.

17, clear water and blue sky 1#, 2# building foundation pit excavation completed, 3# building foundation pit excavation completed 50%.

18, clear water and blue sky 13# and 20# building pile foundations are completed.

19, the construction of the external network road began.

Second, the quality and safety situation

This month, the quality will be strictly controlled, and the partial acceptance will be carried out in strict accordance with the regulations to ensure the acceptance of the project, especially the quality of the engineering raw materials. All kinds of building materials entering the site shall be accepted by the quality inspection team. Only after passing the inspection can you enter the site, and those who do not meet the requirements will leave immediately. The project quality is guaranteed, and all the projects completed this month are qualified.

For safety problems, strengthen safety management, and immediately request to stop work and rectify the engineering parts with potential safety hazards. Construction shall not be carried out if the rectification is not in place. All kinds of machinery must be inspected by Party A's supervisor after installation, and can only be put into use after passing the inspection. And the intensity of safety punishment has been strengthened for each project department, so that each project can enhance safety awareness and attach great importance to safety. There was no safety accident this month.

Third, others.

In order to ensure the smooth progress of the project, students moved in, and the commercial and residential area started smoothly in August, the engineering department cooperated with the development department and the logistics department of the college to make a number of communication and docking work, such as the elevation change of the commercial and residential area, the determination of the road pipe network scheme, the later management of the college, and the layout change of the teaching building.

Fourth, the focus of work next month

1, quality of interior and exterior wall decoration works and installation works in the first phase of the College. Strictly control the quality of the first-phase decoration materials and installation materials. Ensure the project progress and safety. Next month, the first phase of the road and pipe network project must be completed with good quality and quantity.

2. The second phase of the college project: strengthen management to ensure that it is completed as planned.

The monthly work summary of the engineering department started on March 5. As I arrived a little later than other colleagues, I began to get familiar with the environment while working. Through the support and help of the leaders, I quickly learned and became familiar with some general situations of the hotel preparation stage. In September, we mainly did the following work.

First, basically familiar with the project status and construction scale of each project in the hotel renovation. At present, the project has entered the stage of cross-operation, but it has not yet fully entered the large-scale cross-ending construction site. It is expected that large-scale cross construction will be carried out at the end of this month or early next month.

2. With the support and help of the personnel department, three key employees have been carefully selected, and these three employees are scheduled to take up their posts on June 10 this month.

Thirdly, according to the planning and deployment of the hotel and the operation of the department, the countdown work plan of the engineering department is analyzed and formulated.

Fourthly, in order to master the actual layout of engineering technology and the status of equipment and facilities, we need a large number of relevant drawings. Through communication with the project department, we have collected some drawings, which are basically enough at present. It is ready for the next professional use.

5. The first draft of the management' operating rules' of the Engineering Department has been basically completed, and the list of engineering materials and tools used for opening has been submitted to the Finance Department and merged with it for filing.

At present, the hotel project construction has entered the later stage, and the first batch of key employees of our department are in place this month. We mainly do two things well; On the one hand, cooperate with the personnel department to train new employees, on the other hand, arrange employees of different professions to check the wiring situation of their respective professions according to the construction progress of the project, so as to grasp the construction situation of each profession as soon as possible. Before the decoration project is capped, fully grasp the direction and direction of all kinds of pipelines, and find out their control scope and technical data, so as to lay a good foundation for future equipment maintenance.

Monthly Work Summary of Engineering Department 4 After a busy and intense work task in May, the work in June is coming to an end. Below, I will summarize some work of the engineering department as follows:

I. Overview of Project Implementation in June

This month's production task list * * * has 9 projects, including BYD Guangxi Cultural Festival, BYD Haikou Exhibition, BYD Xiamen Exhibition, Kia Project Rectification, Evergrande Real Estate, CITIC, Desai Electronics and Universiade, and 18 sets of exhibits. Among them, Evergrande Real Estate in charge of Rao Jieping, CITIC Project in charge of Luo Xiaohong, Guangxi Cultural Festival in charge of Ceng Liping and BYD Xiamen Exhibition in charge of Shu Pingbo have been completed, and the rest projects will be completed around the end of the month as planned. While completing the "quantity", we also strive to ensure the "quality".

Second, the factory operation overview

1. Production task completion

Of the nine projects completed this month, the rectification of Guangxi Cultural Festival, Evergrande Real Estate, CITIC and Kia projects has been completed on time, and the rest have been done by special personnel. Now the overall progress is well grasped, and the production of exhibits can be effectively completed within the mission period as planned.

2. Plan first, then execute, emphasize methods and seek efficiency.

Starting from this month, we will vigorously implement the planning system, improve the workflow and ensure the effect. In the process of issuing order documents, the progress plan is also delivered to the project leader, and the progress plan is written before the task begins, so as to control the whole project and implement the content of the project production progress plan without formalism. Before loading, the person in charge of the project should also fill in the bill of materials for the exhibition, load all the exhibition numbers and check them in detail. It is also necessary to conduct pre-exhibition training, discuss and study the details of the exhibition with everyone, and clarify the exhibition tasks of the exhibition staff. After the exhibition, the person in charge of the project is required to summarize the existing problems and lessons, and summarize and evaluate the effect of the project.

In terms of employee motivation, the excellent employee selection mechanism was initially implemented this month, and its detailed standards have also been posted. The number of employees is tentatively set as a management mode with three employees. In the welfare system, it is scheduled to add meals once a week and five fruits on Wednesday; In terms of corporate culture, the initial focus is to establish the factory's own culture by shaping the habits of employees. In terms of the arrangement of employees' after-work activities, it is planned to build an employee lounge, play company promotional films, movies, TV dramas and other programs, and set up newspapers and periodicals to read. In view of the age of the factory employees, the employee sports activities are planned in the form of tug-of-war competition. If circumstances permit, the above activities will be implemented next month, and the specific details need to be improved.

3. KIA project rectification, pay close attention to quality and details.

In this month's task list, leaders at all levels attach great importance to the improvement of KIA's exhibition furniture, and our factory has also invested a lot of manpower and material resources in the improvement of this project. The painting, trimming, production, construction and material selection of exhibition furniture in the last auto show have also been solved in this rectification. At the same time, through the problems exposed by this Kia project, the future work will focus on improving the details and quality of the exhibition and strengthening the concept of time and discipline.

Third, factory management defects and solutions

Insufficient:

1. The specifications emphasized by the factory are not binding and need to be strengthened. (Exhibitors wear shorts, which causes serious scratches on their legs. )

2. The handover between the executive department and the factory is unclear, the two sides lack communication in advance, and the person in charge and the person in charge are unclear. The timeliness of task time, content and preparation documents is seriously lagging behind, which leads to contradictions and seriously interferes with production.

3. The team leaders have poor communication awareness, poor task priorities, unorganized work and weak management and control ability of team members.

4. The behavior requirements of factory personnel should be carried out in strict accordance with the process of the factory. If there is a problem, report it to the superior, and avoid overstepping. Find the relevant person in charge to solve the problem according to the nature of the problem.

5. Employees have poor sense of community and collective.

6. The lack of consciousness and methods of managers has no obvious effect.

7. Managers' inaction. The concrete manifestations are: the work is arranged by the superior, the existing problems are not exposed, the work lacks initiative, the sense of responsibility is not strong, and it is better to do more than less. Many problems are often easy to solve when they first appear, but managers ignore them and make them worse. This kind of middle management is actually in a passive and irresponsible state, which is a cancer of the factory and must be removed and eliminated. Every manager must conscientiously perform his duties, and the implementation is guaranteed by the system, otherwise the supervisor will be punished. Suggestion:

(1) needs to be adjusted.

Idea: The current management is not dedicated to giving orders, but to forge ahead with employees and achieve goals.

Mentality: personal gain and loss, don't pay too much attention to the responsibility at first, don't feel that you are very capable, improve yourself first. This is a matter of public opinion. Over time, personal emotions will naturally improve, and it is only a matter of time before the approval of superiors.

Skills: Employees must be proficient in their own work. When they encounter problems, they should explore first. If they can't overcome it, they should consult experienced people, take more records and think about why, because employees will inevitably encounter such problems in the future and will ask you to deal with them first.

Experience: if you don't know the problem, you won't prevent it. At ordinary times, you should remember all aspects of the problem and use it for me. Don't let them happen again. In production, you should preach, explain and remind employees in a targeted manner, so as to take precautions in advance.

② Need to be strengthened.

The requirements are clear: the matters promoted by superiors and the operating norms should be understood and familiar, and managers should take pains to explain and assess them, especially the employees with weak ability.

Training: the most effective and direct, the actual cases in the homework are often told to employees, shown to employees, and then he will show them to you.

Employee problem: think more from the employee's standpoint, explain the truth and facts clearly, blame less and care more.

Management: Plan, arrange and coordinate reasonably to make the production line smooth and create a tense and harmonious atmosphere.

(3) Need to be clear

Factory logo: the number of exhibition tools is clear to prevent mistakes in use; The production area and stacking area should be clearly marked. Factory system: perfect system, clear rewards and punishments, laws to follow, normal production, not for employees to explore. Management should seek the most reasonable and effective methods, or learn from others' methods and absorb their essence. Factory environment: It is absolutely impossible to produce good products in a dirty working environment. Strictly implement the 5S regulations of factory production to ensure the effect.

Summary: The system is strong, the plan is clear and definite, the control is in place, the implementation is carried out on time and in quantity, and the pursuit of quality, efficiency and discipline is established! All efforts are only for the smooth progress of production!

Monthly Work Summary of Engineering Department 5 I. Work content completed this month:

1, completed all temporary tasks assigned by superiors.

2. Complete the replacement of damaged bulbs of park street lamps.

3. The signal wire of Xie Yuan 1 air conditioning unit was repaired to ensure the normal operation of the unit.

4. Completed the maintenance of dishwashers in the floating dining room and staff dining room, ensuring the normal use.

5. The background boards in the meeting room and lobby of the clubhouse were removed.

6. Cooperate with the sanitation team to complete the cleaning of grease traps and septic tanks in each area.

7. Completed the installation of the TV and mirror in the caddy room and the installation of the starting clock.

8. Complete the replacement of damaged light bulbs in all guest rooms.

9. Cooperate with Luqiao Company to complete the departure of the club. Tainan pipeline is leaking.

10, completing the welding repair of fluorine leakage of Luyuan No.6 air conditioning unit.

1 1. Completed the installation of the satellite signal antenna at Damengang.

12. Complete the repair of water leakage in the men's locker room of the club.

13. Complete the installation of the power cord of the air compressor of the shoe blower.

16, cooperate with the pipe cleaning company to clean the sewer pipe of the aquatic restaurant.

17, control and save water and electricity, reduce energy consumption of water and electricity, and switch landscape lighting, street lamps and air conditioning units on time.

18. Cooperate with the power company and water supply company to copy the readings of water and electricity consumption, and report the invoices of water and electricity expenses to the superior leaders and submit them to the finance department as soon as possible.

Two. Contents and reasons of unfinished work this month:

The installation of additional lamps in Harmony Garden 1 room has not been completed. Reason: Because the model of lamps is not easy to purchase in the market, it needs to be purchased from the manufacturer. We have contacted the supplier to purchase and install the lamps after arrival.

Three. Problems and solutions in this month's work:

The outdoor ground between 1 and 6 -7 Road Yard is leaking.

Treatment measures: report to the owner in writing and contact Manager Tang of Luqiao Company. Through on-site inspection and drawing review, the conclusion is that the main water supply and drainage pipeline is leaking. In recent days, this pipeline maintenance has been excavated and repaired by the construction unit.

2. At present, the air-conditioning unit of Luyuan No.5 villa is out of order and can't be turned on for normal use. Treatment measures: The air conditioning unit of No.5 villa in Xianyuyuan has been damaged, so it can't be started and used normally.

Check and confirm that the unit has fluorine leakage, the normally closed point of water flow switch is damaged, and the unit is under construction.

When it is hot, after the ground source side water pump stops running due to a fault, the water flow switch is damaged, and the unit continues to run without sending a signal, resulting in the damage of the unit, which belongs to the quality problem of the equipment unit. After that, other air conditioning units were inspected, and the inspection results showed that the water flow switch of Luyuan 1, 2, 7, 8, 9 and 10 units had no fault and could be started for normal use. Water flow switch of Luyuan Units 3, 5, 6, 1 1 and 12 is damaged, so it can be started. In order to avoid unit damage caused by water flow switch, please report to the company leaders and try to arrange guests to stay in Luyuan 1, 2, 7, 8, 9, 10 villa in the near future. We have reported to the owner in writing and contacted the equipment manufacturer and the construction and installation unit to determine the cause, repair the unit and ensure its normal use.

Fourth, the work plan for next month

1, complete all tasks temporarily assigned by superiors.

2. Cooperate with the sanitation team to complete the cleaning of grease traps and septic tanks in each area.

3. After some parts and materials are bought back, complete the engineering problems that need maintenance and increase the engineering projects.

4. Cooperate with the construction unit to complete the repair of outdoor leaking pipes at No.6-7 Lvyuan.

5. Cooperate with the air-conditioning system installation unit to complete the maintenance of Luyuan No.5 air-conditioning unit and water flow switch to ensure normal operation.

6. Overhaul and maintain the air conditioning units in Luyuan 1/Villa and Heyuan1,2 and 3 Mansions.

7. Control and save water and electricity, reduce energy consumption of water and electricity, and switch landscape lighting, street lamps and air conditioning units on time.

5. There is no work content that needs the cooperation of the company or other units.

6. Have no constructive opinions on the operation of the club.

Monthly Work Summary of Engineering Department In June and July, according to the unified deployment of the company, with the strong cooperation and concern of various departments, the engineering department has continuously completed the office building decoration, loop survey and setting out, geological exploration, loop project establishment and other work. The specific work in June is summarized as follows:

(1) Office Building Decoration Project

The office building renovation project entered the site on June 1 and has been under construction for one month. Now, the staff quarters and office parts have been delivered for use, and the project has entered the final filling stage.

(II) Project Establishment of Ring Road The project establishment of Ring Road has been fully guided by the administrative committee, development and reform bureau and other government departments, and cooperated with the engineering department to seriously organize the preparation of relevant materials for the project, and submitted to relevant departments, which are now under examination and approval.

(three) the ring road survey and geological exploration work

According to the overall plan, the survey and setting-out of the loop line is carried out by Sunshine Surveying and Mapping Company, and the drilling survey and setting-out work has been completed, and 52 points need to be measured. With the strong cooperation of relevant government coordination groups, efforts have been made to coordinate the relationship between local residents and water supply and power supply, and the work has been steadily advanced. Now, 20 points have been drilled. Work plan for July:

(1) The office building renovation project is planned to be completed and put into use before July 6th. Organize acceptance and settlement.

(2) Continue to do a good job in geological exploration of the ring road and complete the remaining 32 drilling points. It is planned to complete all geological exploration and drilling work before July 10.

(three) to complete the overall planning review and the planning review of resettlement areas.

(4) Formulate relevant systems for project management.

(five) to complete the relevant work of loop construction and design, and make preparations before loop construction.

(6) Make preparations for the commencement of construction.

(VII) Strive to complete other tasks assigned by the Company.

;