Traditional Culture Encyclopedia - Hotel reservation - Maintenance method of Atlantis wardrobe for mini hotel furniture

Maintenance method of Atlantis wardrobe for mini hotel furniture

1, always keep the cupboard door clean, and there can be no sundries and dust in the track.

When cleaning, you can wipe the cabinets and doors with a semi-wet rag, and do not use corrosive cleaning agents.

Dust on the track can be cleaned with a vacuum cleaner or a small brush, and metal parts such as cabinets and pull rods can be wiped with dry cloth.

2. Heavy objects and sharp objects should be prevented from hitting the track and scratching the cabinet and door panel. The edge of the cabinet should not touch water and other liquid solvents to prevent the edge from falling off.

3, let it breathe more, or use a dehumidifier regularly, so as to avoid the cabinets and clothes from getting wet and breeding bacteria.

Use less fragrances containing chemical components to deodorize the wardrobe, because they are likely to cause damage to the wardrobe.

4. When the indoor air or weather is too humid, please open the doors and windows regularly for ventilation, and put a small piece of disposable lime or other desiccant in the corner of the wardrobe to prevent the cabinets and door panels from being moldy and deformed.

5. Wooden wardrobes can usually be wiped with clean rags. If they are dirty, you can use soapy water or neutral detergent as appropriate and wipe them with a wet cloth.

6. It is normal that the pulley of the light rail door will have noise after being used for a long time. In order to ensure the long-term smooth and silent pulley, please add some lubricating oil along the upper and lower pulleys regularly every 2-3 months.

7. When shopping, it is the best strategy to choose furniture with high sealing of drawers and cabinets to reduce dust.

8. Don't put the wardrobe in direct sunlight, lest the wood be deformed or brittle under the light.

9. If the sliding door is used for a long time, the dustproof strip may be slightly degummed, so use double-sided tape; If there is a gap in the positioning of the lower rail, it can be aligned with a flat screwdriver and pushed to the side plate to close the seam. The sliding door is inclined. If you lean to the right, adjust the "loose" sign of the left bottom wheel or the "tight" sign of the right bottom wheel.

10, when using the sliding door, be sure to check whether the handle protrudes first. If it is prominent, it should be dealt with in time to avoid causing greater losses. The above is about the maintenance knowledge of the whole wardrobe.