Hotel ap settings

Set your routing mode instead of AP mode, and then change the IP of your LAN port to192.168.30.1. As long as you plug the network cable directly into the computer, there is no problem.

What you said will be disconnected at the hotel. It may be that some households are also using routing, but if the network cable is plugged into the LAN port, it will interfere with the network. This is the most likely problem.

But if this is the case, first plug the network cable into the computer, look at the IP automatically obtained by the computer, write it down, then enter your route, select the static IP in the WAN port settings, and fill in the parameters you copied.