How to replace the battery of the ground lock

How to install the ground lock and the installation method of the parking space ground lock. The ground lock is a metal mechanical device installed on the ground, and its main function is to prevent others from grabbing parking spaces. Ground locks have entered the families of car owners, but many people don't know how to install them. The following small series will take you to find out.

How to install the ground lock?

First of all, choose the installation location. It is recommended that the ground lock be installed in the middle of the parking entrance of 1.3 m or 1.5 m, and it is best to choose a flat cement floor.

2. Fix the battery plug and the controller plug, and then use the remote control button to move the ground lock up and down for 2 to 3 times.

3. Press the bottom button with an electric drill, drill four holes of 8mm or 10mm, then install expansion screws to fix the bottom, and finally fasten the main body.

4. Before use, insert the plug corresponding to the lead color of the battery panel into the battery, then lay the battery flat, insert the plug into the parking lock socket, and tidy up the wires.

5. If it is a remote lock, remember to test the remote control effect to ensure that the rocker arm can rise and fall normally.

?

Matters needing attention in installing ground lock

1, loose ground, such as soil, needs cement irrigation.

2. Try not to install it on the stone pavement.

When you make this hole, you need to mark it.

4, the depth of the hole, more than 2cm longer than the screw.

Installation position of parking space ground lock

1. If it is in the open space of a residential area or on the roadside, it is recommended to choose triangular, A, octagonal and O manual parking locks. Because there is a large flow of people in the community and on the roadside, it is necessary to prevent the weak elderly and naughty children from tripping, so as not to cause disputes.

2. The above places do not include K-type and T-type manual parking locks. But "since God has given talents, let them be used!"! K-type and T-type ground locks are generally installed in hotels, guesthouses, hotels, etc. Because parking is forbidden in these areas, and there are also special personnel responsible for it, the amount required is less.

3. High-end residential areas or underground garages are generally equipped with remote parking locks. Because the underground parking space is smaller than the above-ground parking space, it is very troublesome to install the manual parking lock, and it is also very easy to cause congestion when commuting. It is understandable for high-end residential areas to choose it. Its beautiful appearance and humanized design are highly sought after by car owners.